Best current price£62.14from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£62.14Visit shop Draper 41822 Automotive Digital Multimeter 1 X Temperature Probe 1 X Inductive Clamp Each
Visit shop
B&Q£87.75Visit shop B&Q - Automotive Digital Multimeter1 X Temperature Probe1 X Inductive Clamp 41822
Visit shop13 offers from £62.14 - £94.99
View price history by clicking the chart icon.
This guide is for anyone using the Draper DMM301 Automotive Digital Multimeter. It helps you understand the features and how to use them effectively to perform electrical tests on vehicles. While the DMM301 offers a wide range of capabilities, it's essential to understand the basics of electrical testing to use it safely and correctly.
| Model Part Number | DMM301 |
|---|---|
| Brand | Draper |
The inductive clamp is used to measure AC current without disconnecting the circuit. Simply clamp it around a single wire to measure the current flow.
Set the dial to DC voltage (V) and select a range greater than the battery's voltage (typically 12V). Connect the red test lead to the positive (+) terminal and the black lead to the negative (-) terminal.
The Dwell function measures the angle of time that a distributor points are closed. This is crucial for precise ignition timing and efficient engine performance.
The Data Hold function freezes the current reading on the display. This is useful when working in tight spaces or when the reading is difficult to see.
Turn the dial to the Ohm (Ω) setting. Disconnect the component from the power source. Connect the test leads across the component to measure its resistance.
While the DMM301 can measure voltage, it's primarily designed for automotive use. It might not be suitable or safe for household circuits. Always confirm the specifications of the DMM before use.
Warranty information is not available in the product information.
Check the battery and replace if necessary. Ensure the battery is correctly installed.
Verify the selected function and range. Check the test leads for damage. Ensure the probes are making proper contact.
Replace the battery. Check the backlight setting.
Make sure the function dial is set to continuity testing (diode test with the continuity symbol). Check the circuit for open circuits.
