Best current price£158.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£158.99Visit shop B&Q - Luminosa Unika Led Patterned Glass Flush Ceiling Light White 4400Lm With Remote Control Cct Wifi 49.5Cm
Visit shop2 offers from £158.99 - £179.95
View price history by clicking the chart icon.
The Netlighting Unika LED Patterned Glass Flush Ceiling Light is designed for homeowners seeking a modern, stylish, and functional lighting solution. Its key benefit is providing bright, adjustable illumination with the convenience of remote control. A potential caveat is its IP20 rating, making it suitable for dry indoor environments only. This ceiling light features a white finish, patterned glass effect, and an integrated LED that delivers 4400 lumens. Key features include adjustable color temperature (CCT) and Wi-Fi connectivity.
| Colour | White |
|---|---|
| Model Part Number | 8031414875306 |
| Brand | Netlighting |
The Unika LED Patterned Glass Flush Ceiling Light has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but offers no protection against water. It is suitable for use in dry indoor areas only, such as living rooms, bedrooms, and hallways. It is not recommended for bathrooms or kitchens.
No, the LED lamp is integrated into the fixture and is not designed to be user-replaceable. The LED is rated for a long lifespan, and typically the entire fixture would need replacing if the LED fails outside of warranty.
You will need to download the manufacturer's companion app onto your smartphone or tablet. Follow the in-app instructions to put the light into pairing mode and connect it to your home's 2.4GHz Wi-Fi network.
CCT stands for Color Correlated Temperature. This light allows you to adjust the color of the light emitted, ranging from warm white (like traditional incandescent bulbs) to cool white (like daylight). This is controlled via the remote or the Wi-Fi app.
The light can be turned on and off using a standard wall switch. However, to access features like brightness adjustment, CCT changes, or Wi-Fi control, you will need to use the provided remote control or the companion app.
The light measures 49.5cm in diameter.
The light has a maximum wattage of 40W and produces a lumen output of 4400 lumens.
Check that the main power switch is on and that the circuit breaker has not tripped. Verify all electrical connections are secure. Ensure the remote control has battery power and is within range, or check Wi-Fi connection status if using app control.
Replace the battery in the remote control. Ensure there are no obstructions between the remote and the ceiling light. Try re-pairing the remote with the light by following the setup instructions.
Ensure your Wi-Fi router is functioning and broadcasting a 2.4GHz network. Restart your router and the ceiling light. Check that the light is within range of the Wi-Fi signal and try reconnecting through the companion app.
Verify that you are using the correct remote or app for this model. If using the app, check for software updates. Ensure the light is not in a pre-set mode that overrides manual adjustments.
Setup: This fixture is designed for flush ceiling mounting. Ensure the power is switched off at the mains before installation. Follow the included wiring diagram to connect the light to your home's electrical supply. The remote control should be paired with the light according to the manufacturer's instructions, typically involving pressing a button within a short timeframe after powering on the light.
Compatibility: The light is compatible with standard household electrical systems. For Wi-Fi features, a 2.4GHz Wi-Fi network is usually required. Ensure your smartphone or tablet has the necessary app installed to utilize the Wi-Fi controls. It is not compatible with dimmer switches unless specifically stated by the manufacturer, as dimming is controlled via the remote or app.
Care: To clean the light, first disconnect the power supply. Use a soft, dry or slightly damp cloth to wipe the acrylic shade and base. Avoid using abrasive cleaners or solvents, as these can damage the material. Ensure the light is completely dry before restoring power.
