Fit For The Job Paint Roller Kit - 7 inch



Best current price£7.94from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.94Visit shop B&Q - (Pset7) 7" Ffj Roller Kit
Visit shop


Best current price£7.94from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.94Visit shop B&Q - (Pset7) 7" Ffj Roller Kit
Visit shop2 offers from £7.94 - £37.49
View price history by clicking the chart icon.
The Fit For The Job 7-inch Paint Roller Kit is designed for DIY enthusiasts and homeowners tackling interior painting projects on walls and ceilings. It provides a balanced toolset for achieving a smooth, professional finish with emulsion paints, though users should note that the 7-inch width is best suited for medium-sized spaces rather than expansive, open-plan commercial walls.
| Model Part Number | Pset7 |
|---|---|
| Brand | Fit For The Job |
This roller is specifically designed for emulsion paints. Oil-based paints may degrade the synthetic fibers and are difficult to clean out of this material.
The tray is sized specifically for 7-inch rollers. Larger rollers will not fit properly, and smaller rollers may be awkward to use.
No, the kit includes the handle fitting, but the extension pole must be purchased separately.
Wrap the roller tightly in a plastic bag or cling film to prevent it from drying out for up to 24 hours.
Yes, standard 7-inch replacement sleeves can be used once the initial cover wears out.
Before the first use, wrap the roller in masking tape and pull it off to remove any loose fibers, or lightly wash and dry the roller cover.
Ensure the roller cover is pushed fully onto the frame arms until you feel the click or resistance at the end of the frame.
Check that the roller is fully saturated with paint before application; you may need to reload the roller more frequently or apply slightly less pressure.
To prepare for your project, ensure the roller cover is securely snapped onto the frame before pouring paint into the tray. For best results with emulsion paints, lightly dampen the roller cover before first use to "prime" the fabric.
After use, rinse the roller cover thoroughly under warm water until the water runs clear. If using water-based paints, avoid using harsh solvents, as these can degrade the synthetic fibers. The tray should be washed immediately after the project is complete; because it is made of recycled plastic, it is durable enough for multiple uses if cleaned properly. Allow all components to air dry completely in a ventilated area before storing them in a cool, dry place.