D-C-Fix Plain Vinyl Wrap Film - Glossy Grey

Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rej...

Best current price£15.97from B&Q

One Offer

1 offer from £15.97

View price history by clicking the chart icon.

B&QB&Q - Glossy Grey 67.5Cm X 2M Self-Adhesive Vinyl Wrap For Doors And Furniture
Free delivery in 1–3 days
£15.97
Visit shop

Product Information

Full details

This D-C-Fix Glossy Grey vinyl wrap film is ideal for DIY enthusiasts, renters, and homeowners looking to quickly and affordably update surfaces like countertops, kitchen doors, furniture fronts, and wardrobe doors. Its key benefit is providing an authentic, high-quality finish that can transform spaces in minutes, saving the cost of replacement. A potential caveat is that while it's designed for easy removal, some residue may require cleaning, and the non-permanent nature means it's best suited for temporary aesthetic changes.

All features

Model Part Number5056525300434
BrandD-C-Fix

Extended Product Information

FAQs

Can this vinyl be used on a kitchen worktop?

Yes, it can be used on kitchen worktops, provided the surface is smooth, clean, and dry. While durable, avoid placing hot pans directly on the surface and use cutting boards to prevent scratches.

How long does the vinyl typically last?

The vinyl has a 5-star rating for durability, suggesting it is long-lasting for its intended use. Actual lifespan depends on application surface, usage, and care.

Is this vinyl suitable for outdoor use?

The product information does not specify outdoor suitability. It is primarily designed for interior DIY applications like furniture and kitchen surfaces.

How do I remove the vinyl without damaging the surface underneath?

Gently warm the vinyl with a hairdryer on a medium setting, then slowly peel it back at a low angle. Most surfaces should be unharmed, especially if they were clean and well-prepared initially.

What is the best way to clean the vinyl after application?

Clean using a soft, damp cloth with mild, soapy water. Avoid harsh chemicals, abrasive pads, or excessive scrubbing.

Can I apply this over existing wallpaper?

It is best applied to smooth, non-porous surfaces. Applying over textured wallpaper might lead to poor adhesion and a less desirable finish. If attempting, ensure the wallpaper is firmly adhered and smooth.

Troubleshooting

Air bubbles or creases appear during application.

Gently lift the vinyl edge and reapply, using a squeegee or cloth to smooth out the air pockets as you go. For stubborn bubbles, a pinprick can release trapped air.

Vinyl is not sticking properly.

Ensure the surface is clean, dry, and smooth. Re-apply heat gently with a hairdryer to reactivate the adhesive, then press firmly.

Difficulty removing the vinyl cleanly.

Use a hairdryer on a medium heat setting to warm the vinyl thoroughly before peeling. Peel slowly at a shallow angle. Use warm, soapy water to remove any remaining adhesive residue.

The finish looks uneven or wavy.

This may be due to an uneven surface underneath or insufficient smoothing during application. Try to gently lift and reapply, ensuring the underlying surface is smooth and you are applying even pressure.

Pros and Cons

Pros

  • Authentic and high-quality aesthetic.
  • Cost-effective alternative to replacing furniture or surfaces.
  • Easy to apply with repositionable adhesive.
  • Suitable for renters due to non-permanent nature.
  • Durable and rated highly for longevity.

Cons

  • May leave residue upon removal, requiring cleaning.
  • Surface preparation is crucial for best adhesion.
  • Requires careful application to avoid air bubbles and creases.
  • Not a permanent solution for high-wear or structural areas.

Setup, Compatibility & Care Instructions

Setup:

  1. Clean the Surface: Ensure the surface to be covered is clean, dry, and smooth. Remove any dust, grease, or old adhesive.
  2. Measure and Cut: Measure the area and cut the vinyl film slightly larger than needed to allow for trimming.
  3. Peel and Apply: Slowly peel back a small section of the backing paper. Align the vinyl and apply it to the surface, smoothing it down with a squeegee or soft cloth to avoid air bubbles.
  4. Work in Sections: Continue peeling the backing paper and applying the vinyl, smoothing as you go.
  5. Trim Edges: Once applied, use a sharp craft knife to trim any excess vinyl around the edges.

Compatibility:

  • Best suited for smooth, non-porous, and clean surfaces such as laminate, painted wood, glass, and metal.
  • Not recommended for textured, uneven, or freshly painted surfaces (allow paint to cure fully).

Care:

  • Clean with a soft, damp cloth and mild soapy water. Avoid abrasive cleaners or scouring pads.
  • For stubborn residue after removal, use warm soapy water and a soft cloth.

Similar items

Price History

DatePrice
Visit shop