Triplewax Vortex Blast Snow Foam coats your vehicle in a deep cleaning foam that loosens and lifts...Triplewax Vortex Blast Snow Foam coats your vehicle in a deep cleaning foam that loosens and lifts all types of dirt and grime without stripping wax or sealant layers. Developed for use with a pressure washer and snow foam lance. Can be used as a pre-wash before applying a shampoo such as Triplewax Wash & Wax. For an outstanding, long-lasting shine apply Triplewax Carnauba Wax after cleaning. Shake bottle well before use. Use your pressure washer to rinse the vehicle from top to bottom. Pour 100ml into a 1 litre snow foam lance and fill with water. Spray onto the surface of your vehicle, working from bottom to top. To use as a pre-wash: let the foam settle for approximately 5 minutes – do not allow the foam to dry on the vehicle surface. Rinse with a pressure washer, working from top to bottom. To use as a high foam shampoo: Agitate the snow foam on the surface of the vehicle using a sponge, cloth or wash mitt. Rinse with a pressure washer, working from top to bottom. Using a snow foam helps to loosen the bigger bits of dirt and remove them from the surface. This firstly prevents swirl marks and scratches by not contact cleaning when it is very dirty, and secondly allows your contact clean shampoo to work more effectively as it doesn't have as much dirt and grime to get through before it can clean the surface. It has a sweet candy floss fragrance. Triplewax is the number 1 selling car shampoo and polish with over 40 years heritage.
This guide is for anyone looking to achieve a deep clean for their vehicle with ease. The Triplewax Vortex Blast Snow Foam, when used with a pressure washer and snow foam lance, coats your car in a rich foam that lifts dirt and grime without damaging your wax or sealant layers. Note that the best results are achieved when used in conjunction with a pressure washer and snow foam lance.
All features
Brand
Triplewax
Extended Product Information
FAQs
How much product should I use?
Pour 100ml of Triplewax Vortex Blast Snow Foam into a 1-liter snow foam lance, then fill the lance with water.
Can I use this product on any type of car paint?
Yes, Triplewax Vortex Blast Snow Foam is safe for use on all types of vehicle paint.
Does this product remove wax?
No, it is designed to be gentle and will not strip wax or sealant layers.
What is the fragrance?
The product has a sweet candy floss fragrance.
Do I need a pressure washer to use this product?
Yes, the product is designed for use with a pressure washer and snow foam lance for optimal results.
Can I use it as a shampoo?
Yes, you can use it as a high foam shampoo by agitating the foam on the surface of the vehicle using a sponge, cloth, or wash mitt.
How long should I leave the foam on the car?
Allow the foam to settle for approximately 5 minutes before rinsing. Do not allow the foam to dry on the vehicle surface.
What is the benefit of using snow foam?
Using a snow foam helps to loosen the bigger bits of dirt and remove them from the surface which prevents swirl marks and scratches by not contact cleaning when it is very dirty. It also allows your contact clean shampoo to work more effectively.
Troubleshooting
Foam is not thick enough.
Ensure you are using the correct ratio of snow foam to water in your lance. Check the lance settings and adjust as needed. Ensure the lance is clean and free of blockages.
Foam is drying on the surface before rinsing.
Work in the shade or on a cool day. Do not leave the foam on for more than 5 minutes. Rinse thoroughly.
Poor cleaning performance.
Ensure the vehicle is rinsed before application. Allow the foam to dwell on the surface for the recommended time. Consider agitating the foam with a wash mitt or sponge for stubborn dirt.
Pros and Cons
Pros
Effective at removing dirt and grime.
Safe for use on waxed and sealed surfaces.
Easy to use with a pressure washer and foam lance.
Provides a thick foam for extended contact time.
Leaves a pleasant candy floss fragrance.
Cons
Requires a pressure washer and snow foam lance for optimal use.
May not be as effective on extremely heavy dirt without agitation.
Foam can dry on the surface if left for too long.
Requires rinsing with a pressure washer
Setup, Compatibility & Care
Setup:
Ensure you have a pressure washer and snow foam lance.
Attach the snow foam lance to your pressure washer.
Shake the Triplewax Vortex Blast Snow Foam bottle well before use.
Compatibility:
Compatible with most pressure washers and snow foam lances.
Safe for use on all types of vehicle paint.
Safe for use on wax and sealant layers.
Care:
Always follow the instructions on the product label.
Avoid using in direct sunlight to prevent the foam from drying too quickly.
Store the product in a cool, dry place.
Rinse the snow foam lance with clean water after each use.