Best current price£91.32from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£91.32Visit shop Professional Bearing Guided Architrave Router Cutter, 16Mm Radius, 8Mm Shank, 40Mm Cut Diameter & 29.5Mm Cut Length, Tungsten Carbide Tipped, 5027654003305
Visit shop7 offers from £91.32 - £146.95
View price history by clicking the chart icon.
The Trend Bearing Guided Panel Cutter is designed for professional woodworkers and cabinetry makers who need to machine traditional frame doors and panels with precision. It offers the benefit of spindle-moulder quality results when used with a router, providing a robust solution for both natural timber and MDF projects; however, it is strictly intended for use with fixed or inverted router setups and requires lower operating speeds for optimal performance.
| Model Part Number | 18/81X1/2TC |
|---|---|
| Brand | Trend |
No, this cutter is designed exclusively for routers mounted in fixed positions, such as in a router table.
Due to its 86mm diameter, it should be used at lower speed settings to ensure safety and quality of the cut.
Yes, it is fully compatible with both natural timber and MDF.
This tool requires a 1/2-inch collet to match its shank diameter.
Yes, if the bearing becomes damaged or worn, it can be replaced; ensure you use the correct 12.7mm diameter replacement.
Decrease the router speed and ensure the feed rate is steady; clean the cutting edges to remove resin buildup.
Clean the bearing with a degreaser or solvent to remove sawdust and hardened resin; check for physical damage.
Verify that the shank is fully inserted into the collet and that the collet nut is tightened to manufacturer specifications.
Ensure your router is mounted securely in an inverted or overhead configuration, as this tool is not designed for handheld use. Use a 1/2-inch collet to accommodate the shank securely. Prior to operation, clean the bearing of any resin buildup using a suitable solvent to ensure it spins freely, which prevents burning the timber. Store the cutter in a protective case to keep the cutting edges sharp and free from rust. Periodically check that the bearing screw is tight, but do not overtighten, as this may restrict the rotation of the guide.
