Warmer System Wallplate Psw Flange Bracket For Outside Tap

The Warmer System Wallplate accepts 15mm copper and plastic pipes.

The wallplate is compatible with outside taps that have a 1/2'' BSP threaded connection.

You will need standard plumbing tools such as a pipe cutter, sealant/tape, a level, and a screwdriver.

Ensure all pipe connections are tight and sealed properly. Use appropriate sealant or Teflon tape on threaded connections.

The wallplate can be used with various wall types. Ensure you use appropriate fixings for the specific wall material.

Regularly inspect the connections for leaks and clean the area around the plate to prevent debris buildup.

Check the mounting screws securing the wall plate to the wall and ensure the tap is firmly attached to the 1/2'' BSP fitting.

No, it is specifically designed for 15mm copper and plastic pipes.

Check all connections (pipe to wall plate, tap to wall plate) for tightness. Re-tighten or re-seal as needed. Ensure all fittings are properly secured.

Check the mounting screws securing the wall plate to the wall. Tighten if needed. Ensure the tap is securely attached to the 1/2'' BSP fitting.

Ensure the pipe ends are clean and cut squarely. Use appropriate pipe fitting tools and sealant to create a secure connection. Refer to the manufacturer's instructions for specific pipe connection guidelines.