JCP Fixings Spring Toggle Wings - Zyp - M10/25 - Gold

No, the JCP Fixings Spring Toggle Wings are supplied without screws. You will need to purchase M10 screws separately.

The maximum weight capacity depends on the thickness and integrity of the plasterboard, as well as the distribution of the load. Always refer to load-bearing charts for plasterboard fixings and err on the side of caution.

No, these spring toggle wings are specifically designed for hollow walls like plasterboard and drywall. They will not function correctly in solid materials.

The required drill bit size typically corresponds to the diameter of the toggle wings when folded. Consult the product packaging or manufacturer's specifications for the exact recommended drill bit size, as it can vary slightly.

To remove, you usually need to unscrew the fixing item. Then, push the screw back through the toggle wings and carefully pull the toggle wings back through the hole. The wings may not always collapse easily once deployed.

Zamak 3 is a specific alloy of zinc with aluminum, magnesium, and copper. It is known for its excellent castability, strength, and corrosion resistance, making it suitable for hardware applications.

Ensure the hole drilled is the correct size for the toggle. If the hole is too small, the wings may not open. If too large, the toggle may not catch.

Verify that the toggle wings have fully deployed behind the wall. Ensure the M10 screw is properly seated and tightened. Check that the wall material is suitable (i.e., hollow wall, not solid).

While zinc-plated, prolonged exposure to high moisture can cause surface corrosion. Ensure the item is stored in a dry environment when not in use.