D C Fix Whitewood Self Adhesive Vinyl Wrap - White
This is a budget-friendly solution for covering surfaces in your home. The self-adhesive vinyl wra...This is a budget-friendly solution for covering surfaces in your home. The self-adhesive vinyl wrap can be used to cover worktops; it’s heat resistant to 75°C and durable to clean. This is a non-permanent DIY solution and is completely removable, ideal for tenants or landlords looking for a quick fix. Wrap doors and drawers in your kitchen or bedroom, turn shabby to chic with these amazing realistic designs!
Application:
1) Use a dc fix application kit to apply, it won’t damage the vinyl when smoothing out and includes a handy cutting tool.
2) Overlap the vinyl wrap film a few mm to allow for shrinkage when joining on a worktop, for example.
3) The vinyl can be applied around sinks; cut out the sink area and trim any excess.
4) The vinyl has a handy grid on the backing paper, to use as a cutting guide.
5) The vinyl can be difficult to manoeuvre on surfaces like glass and appliances; lightly spray water first.
6) Shaker style doors can be covered; cut each section separately and overlap the vinyl joins by a few mm.
7) Use a hairdryer on curved surfaces; it warms the vinyl wrap film making it more pliable for tricky edges.
Aftercare:
1) To ensure your surface is water-tight, use silicone sealant around sinks and hobs, for example.
2) Wipe clean using regular household cleaner; do not scrub the vinyl and wipe spillages that may stain immediately, e.g. curry.
3) Do not cut or move sharp objects around on the vinyl, it will damage it – always use worktop savers to protect the vinyl.
4) Heat resistant to 75°C, so hot plates and cups are fine, but not hot pans; keep 12 inches away from naked flames.
dc fix Brand: Made in Germany and it shows, with a 5-star rating for adhesion, opacity, lightfastness, shrinkage, and durability. Unlike solvent-based adhesives, dcfix has a water-based low-tack adhesive that allows you to reposition the vinyl during application, it then bonds fully within 24 hours. Remove using heat from a hairdryer.
(90Cm, 15M) Whitewood Sticky Back Plastic Vinyl Wrap Film 5060578101559£6.99 delivery£73.00Visit shop →
Product Information
Full details
This is a budget-friendly solution for covering surfaces in your home. The self-adhesive vinyl wrap can be used to cover worktops; it’s heat resistant to 75°C and durable to clean. This is a non-permanent DIY solution and is completely removable, ideal for tenants or landlords looking for a quick fix. Wrap doors and drawers in your kitchen or bedroom, turn shabby to chic with these amazing realistic designs!
Application:
1) Use a dc fix application kit to apply, it won’t damage the vinyl when smoothing out and includes a handy cutting tool.
2) Overlap the vinyl wrap film a few mm to allow for shrinkage when joining on a worktop, for example.
3) The vinyl can be applied around sinks; cut out the sink area and trim any excess.
4) The vinyl has a handy grid on the backing paper, to use as a cutting guide.
5) The vinyl can be difficult to manoeuvre on surfaces like glass and appliances; lightly spray water first.
6) Shaker style doors can be covered; cut each section separately and overlap the vinyl joins by a few mm.
7) Use a hairdryer on curved surfaces; it warms the vinyl wrap film making it more pliable for tricky edges.
Aftercare:
1) To ensure your surface is water-tight, use silicone sealant around sinks and hobs, for example.
2) Wipe clean using regular household cleaner; do not scrub the vinyl and wipe spillages that may stain immediately, e.g. curry.
3) Do not cut or move sharp objects around on the vinyl, it will damage it – always use worktop savers to protect the vinyl.
4) Heat resistant to 75°C, so hot plates and cups are fine, but not hot pans; keep 12 inches away from naked flames.
dc fix Brand: Made in Germany and it shows, with a 5-star rating for adhesion, opacity, lightfastness, shrinkage, and durability. Unlike solvent-based adhesives, dcfix has a water-based low-tack adhesive that allows you to reposition the vinyl during application, it then bonds fully within 24 hours. Remove using heat from a hairdryer.