Best current price£13.99from eBay
Shopping.co.uk recommended and popular offers
eBay£13.99Visit shop GoSystem Solid wire solder AS7100 Best for plumbing LEAD FREE
Visit shop
B&Q£16.18Visit shop B&Q - Lead-Free Solid Wire Solder85.2G
Visit shop2 offers from £13.99 - £16.18
View price history by clicking the chart icon.
This GoSystem Lead-Free Solid Wire Solder is designed for DIY enthusiasts and professionals looking to achieve reliable plumbing repairs and installations. Its primary benefit is its effectiveness in joining lead-free alloys, copper, brass, and mild steel, ensuring a strong and durable bond. A key consideration is its suitability for specific types of plumbing systems, so always confirm material compatibility before use. This 85.2g spool provides a versatile solution for a range of plumbing tasks.
| Brand | GoSystem |
|---|
This solder is suitable for plumbing using lead/zinc alloy, brass, copper, and mild steel.
Yes, this is a lead-free solder, making it suitable for potable water systems.
Yes, flux is essential for proper solder adhesion and flow. Ensure you use a flux compatible with your pipe material.
Use a soldering iron or torch appropriate for the size of the joint. Heat the base metal of the pipes/fittings evenly until it's hot enough to melt the solder on contact.
The spool contains 85.2 grams of solid wire solder.
While it works with mild steel, galvanized steel requires special preparation and fluxes due to its coating. It is best suited for clean mild steel, copper, and brass.
Ensure the metal surfaces are thoroughly cleaned and fluxed. The joint needs to be heated to the correct temperature; heat the base metal and let the solder melt onto the hot metal, not the flame.
This usually indicates insufficient heat or movement during soldering. Reheat the joint and ensure the solder flows freely, avoiding any disturbance while it cools.
The joint may not have been properly sealed. Clean the area, re-flux, and re-solder, ensuring the solder flows completely around the joint.
Setup: Ensure the surfaces to be joined are clean, free of grease, and properly abraded. Apply a suitable flux to the area to be soldered. Heat the joint evenly using a soldering iron or torch, then apply the solid wire solder to the heated joint, allowing it to melt and flow into the seam. Avoid heating the solder directly.
Compatibility: This solder is designed for plumbing systems using lead/zinc alloy, brass, copper, and mild steel. Always verify the material of your pipes and fittings before use to ensure compatibility.
Care: Store the solder in a cool, dry place, away from moisture and direct sunlight. Keep the spool clean and protected from damage. After use, ensure any tools are cleaned and stored properly.
