Best current price£4.76from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£4.76Visit shop StarTech ROLLOVER Cisco Console Rollover Ethernet Adaptor RJ45 to ...
Visit shop13 offers from £4.76 - £11.95
View price history by clicking the chart icon.
This 6ft StarTech.com Cisco Console Rollover Cable is for IT professionals and network administrators needing to connect computers to Cisco routers, servers, or network equipment. Its key benefit is providing a reliable, cost-effective connection compliant with the Yost Serial Device Wiring Standard. A potential caveat is that it is a standard rollover cable, and users should verify compatibility with their specific network hardware. The cable features RJ45 male connectors on both ends, a durable PVC jacket, and a 6-foot length, designed for dependable network management tasks.
| Model Part Number | ROLLOVERMM6 |
|---|---|
| Brand | StarTech.com |
A Cisco Console Rollover Cable is a specific type of serial cable used to connect a computer's serial port (or a USB-to-Serial adapter) to the console port of network devices, most commonly from Cisco. It uses a 'rollover' wiring scheme to allow direct communication for initial setup and management.
Most modern laptops do not have built-in serial (RS232) ports. If your computer lacks a serial port, you will need a USB-to-Serial adapter to connect this cable.
No, this cable is specifically designed for console port access to network devices for configuration and management, not for standard Ethernet data transfer.
The default settings are typically 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control (9600 8N1). Your terminal emulation software should be configured to these settings.
While it conforms to the Yost Serial Device Wiring Standard, it is primarily intended for Cisco devices. Compatibility with non-Cisco equipment depends on whether that equipment uses the same RJ45 console port pinout and rollover standard.
> Info needed: Warranty information not provided in product data.
Verify both RJ45 connectors are securely seated. Ensure the correct COM port is selected in your terminal software and that the serial port settings (baud rate, data bits, parity, stop bits, flow control) match the device's console port defaults. If using a USB-to-Serial adapter, check its driver installation and status.
Double-check the serial port configuration settings in your terminal software. Incorrect baud rate or other parameters will result in unreadable data. Ensure the cable is not damaged and is the correct type (rollover).
Ensure the USB-to-Serial adapter is properly installed and its drivers are up to date. Try a different USB port on your computer. Test the adapter with another serial device if possible.
Setup:
Compatibility:
Care:
