Best current price£7.63from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£7.63Visit shop E-Tech Engineering Quick Align Wheel Tool - M12 x 1.5
Visit shop10 offers from £7.63 - £12.82
View price history by clicking the chart icon.
The E-Tech Engineering Quick Align Wheel Mounting Tool is designed for vehicle owners and mechanics who need to mount wheels onto hubs safely and efficiently. Its primary benefit is acting as a guide to prevent wheel damage and ensure proper alignment during installation, with a key caveat being the need to select the correct thread diameter/pitch for your vehicle. This tool simplifies wheel mounting by screwing into a bolt hole, guiding the wheel, and allowing for secure installation before being removed.
| Model Part Number | EWAT-03 |
|---|---|
| Brand | E-Tech Engineering |
The E-Tech Engineering Quick Align Wheel Mounting Tool is available in several common thread sizes, including M12 x 1.5mm, M12 x 1.25mm, and M14 x 1.5mm. Always verify the correct size for your vehicle.
The tool is sold in pairs, and using two can provide extra stability. However, one tool is sufficient to guide the wheel onto the hub, allowing you to then insert the remaining lug bolts.
It can be used on any vehicle with standard threaded lug bolt holes. You must ensure you select the correct thread size for your specific vehicle model.
Consult your vehicle's owner's manual or measure your existing lug bolts. Common sizes are listed, but always confirm the exact specification for your vehicle.
No, this tool is a temporary guide to assist in wheel mounting. It must be removed before the final lug bolts are torqued to specification.
Clean the tool with a dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the threads or finish.
Please refer to the product packaging or E-Tech Engineering's official website for specific warranty information, as it can vary.
Ensure you have selected the correct thread size and pitch for your vehicle. The hole may also be damaged; inspect the threads on the hub.
Slightly rotate the wheel while attempting to seat it onto the tool. Ensure the tool is screwed in straight and fully.
Ensure the wheel is fully seated against the hub and that the other lug bolts are only finger-tight. Try wiggling the wheel slightly while unscrewing the tool.
Discontinue use immediately. This indicates the wrong thread size was used or the tool has been damaged. Inspect the corresponding hub threads.
Setup:
Compatibility:
This tool is compatible with vehicles that use standard threaded lug bolts. Ensure you choose the correct thread size for your specific make and model. Check the available thread options provided by E-Tech Engineering to match your vehicle's requirements.
Care:
