Marshalltown Pro Tile Cutter - 630mm

You can cut ceramic, porcelain, and mosaic tiles up to 24-3/4" (630mm) in length and 5/8" (16mm) thick.

Use the protractor gauge to set the desired angle. Align the tile, score it, and then snap along the scored line.

Consult the user manual for detailed instructions on replacing the cutting wheel. Make sure to use the correct replacement part.

Ensure the tile is aligned correctly before scoring, the monorail is clean, and you are applying consistent pressure during the cutting process.

This tile cutter is not recommended for glass tiles. Always check the tile type compatibility before use.

Wipe down the cutter with a clean, dry cloth after each use. Clean the monorail to remove dust and debris.

Warranty information is not available in the provided product data. Consult the manufacturer for warranty details.

Ensure the tile is firmly supported, apply consistent pressure when scoring, and adjust the cutting depth if necessary. Check the condition of the scoring wheel and consider replacing it.

Make sure the tile is aligned correctly before scoring, and that the monorail is clean and unobstructed. Ensure consistent pressure throughout the cutting process.

Check and tighten the protractor gauge screws. Ensure the gauge is flat and flush with the base. Recalibrate if needed, by comparing with a known angle.

Clean the cutting wheel. If it's still hard to move, apply a bit of light machine oil to the monorail.