Denso Mass Air Flow Sensor - DMA-0100

This high-quality Denso Mass Air Flow (MAF) sensor is designed to accurately measure the intake ai...

Best current price£90.99from eBay

All Offers

12 offers from £90.99 - £126.30

View price history by clicking the chart icon.

eBayDenso Air Flow Mass Sensor 5 Pins Electric Mode Fits Lexus Toyota DMA0100
Free delivery in 1–3 days
£90.99
Visit shop
My Motor WorldDenso Dma-0100 Air Mass Sensor
Free delivery in 1–3 days
£99.99
Visit shop

Product Information

Full details

The Denso DMA-0100 Mass Air Flow (MAF) sensor is a premium replacement component designed for Toyota and Lexus owners looking to restore factory-spec engine management and fuel efficiency. It is ideal for DIY mechanics and professionals aiming to resolve rough idle or poor fuel economy caused by a malfunctioning sensor; however, users should note that the vehicle's Engine Control Unit (ECU) may require a brief drive cycle to relearn fuel trim values after installation.

All features

Model Part NumberDMA-0100
BrandDenso

Extended Product Information

FAQs

Is any calibration required after installing the DMA-0100?

While the sensor works out of the box, the vehicle's ECU will perform a 'relearn' process during the first 20-50 miles of driving as it adjusts to the new sensor data.

Can I clean the sensor if it gets dirty?

It is highly recommended to use only a dedicated MAF sensor cleaner spray. Never use harsh solvents or physical tools, as they will destroy the sensitive internal components.

How do I know if my MAF sensor is failing?

Common signs include poor fuel economy, stalling at idle, hesitation during acceleration, and a persistent check engine light with P0171 or P0174 codes.

Does this sensor come with the mounting O-ring?

Yes, the Denso DMA-0100 typically includes the necessary rubber O-ring seal to ensure an airtight fit into the intake housing.

Why is the Denso brand recommended for Toyota/Lexus?

Denso is the original equipment manufacturer (OEM) for most Toyota and Lexus vehicles, meaning their parts are identical to the components installed at the factory.

Troubleshooting

Check engine light remains on after installation

Disconnect the negative battery terminal for 15 minutes to reset the ECU, or use an OBD-II scanner to clear the stored fault codes.

Engine runs rough immediately after replacement

Ensure the sensor is fully seated and the electrical connector is clicked securely into place; also confirm the air intake boot is free of vacuum leaks.

Pros and Cons

Pros

  • Direct OEM replacement ensures seamless installation
  • High manufacturing standards for long-term reliability
  • Restores engine performance and throttle responsiveness
  • Reduces the likelihood of check engine lights related to intake readings

Cons

  • Does not include new mounting screws in the package
  • Requires careful handling as the internal sensor element is fragile
  • May require professional scan tool to clear persistent error codes

Setup, Compatibility & Care

Installation of the Denso DMA-0100 should be performed while the engine is cool. First, locate the MAF sensor on the air intake housing between the air filter box and the throttle body. Disconnect the electrical harness, unscrew the mounting fasteners, and gently pull the sensor straight out of the housing. When installing the new DMA-0100, ensure the O-ring seal is seated properly to prevent unmetered air leaks. Avoid touching the delicate sensor element inside the housing with your fingers. This part is compatible with specific Toyota and Lexus models; always verify your vehicle’s specific engine type before installation. To care for the sensor, ensure your air filter is replaced at regular intervals to prevent dust and debris from contaminating the sensor housing.

Price History

DatePrice
Visit shop