3.5mm Stereo Jack Plug - Black

Yes, this is a solder-type jack plug. You will need basic soldering equipment and skills to attach it to an audio cable.

The plug is designed to accommodate cables with an outer diameter of up to 6mm.

The gold plating on the connector ensures excellent conductivity for a clear audio signal and provides resistance against corrosion, leading to a more durable connection.

While it is a stereo plug, it can be adapted for mono use by connecting both Left and Right channel inputs to the Tip terminal and the ground to the Sleeve terminal. However, it's designed specifically for stereo signals.

The threaded housing screws onto the main plug body, securing the cable and providing strain relief by gripping the cable's outer jacket. This helps prevent the cable from being pulled out of the plug.

Yes, its durable metal construction, gold connector, and locking feature make it suitable for professional applications where reliability and longevity are important.

Check solder connections to ensure all wires are securely attached to the correct terminals. Verify cable integrity and ensure the plug is fully seated in the audio jack.

Re-check solder connections. Ensure the Left channel wire is connected to the Tip terminal and the Right channel wire is connected to the Ring terminal.

The cable diameter may exceed the 6mm limit. Consider using a thinner cable or carefully widening the housing entry point if possible (not recommended).

Ensure the threaded housing is fully tightened. If the cable itself is loose within the plug's entry point, consider adding a small amount of tape or heat shrink tubing to the cable jacket before feeding it through the housing.