ROC Coil Spring - CS4203
ROC offers a wide range of standard and heavy-duty replacement springs manufactured in Lesjöfors, ...ROC offers a wide range of standard and heavy-duty replacement springs manufactured in Lesjöfors, Sweden using cold coiling technology. Every ROC spring undergoes a multi-stage manufacturing process to ensure optimum performance and the longest possible service life. All ROC springs are shot peened after coiling, a process that bombards each spring with millions of tiny steel balls to introduce a positive residual stress in the spring, improving fatigue strength and preventing premature breakage. ROC springs are protected from corrosion by Zinc Phosphate, which offers galvanic or 'sacrificial' protection via preferred oxidisation, i.e. the zinc corrodes before the spring steel, and generally at a slower rate, prolonging the life of the spring. Each spring is then coated with epoxy powder resin paint via electrostatics, providing further corrosion protection. Every ROC spring is inspected and tested to meet the highest quality standards, then marked with a production code and batch number for full product traceability. For safety, suspension springs should always be replaced in axle pairs, as different springs on the same axle can cause an imbalance in the suspension, adversely affecting vehicle handling and braking. ROC's guarantee applies only when springs have been replaced in axle pairs. Always check the spring size and end shapes are correct prior to attempting fitment and ensure springs are fitted with the same orientation as the original equipment spring. Appropriate care should be taken when replacing a spring, as a compressed spring holds a huge force and could cause serious injury if it came loose during fitment. Special tools should always be used to compress a spring, and spring installation should only be undertaken by a competent person following instructions from a recognised repair manual. Spring pans, bushings and link-arms should always be checked for damage and replaced if necessary. After installation, springs should be checked to ensure they are correctly located at the ends and are not too short or loose. Wheel alignment should also be checked. All ROC springs are manufactured in accordance with ISO9001 & ISO14001, and in an IATF16949 environment.
Best current price£40.62from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£40.62Visit shop ›Suspension spring Rear Axle Coil Spring 4244203 LESJÖFORS for KIA CLARUS
Visit shop ›