VEVOR High Pressure Hydraulic Hose Crimper - MK-16

No, the tool is strictly rated for a crimping range of 6mm to 28mm. Exceeding this limit may damage the 8-petal seat structure.

While pre-tested, it is recommended to cycle the pump a few times without a hose to ensure smooth operation and check for any air pockets.

The tool is designed for standard automotive and industrial hose fittings. Check the hardness rating of your fittings against the 20Cr forged steel specifications.

The dies are crafted from high-strength forged steel to ensure they maintain shape under high compression.

For professional use, apply a light coat of lubricant after every 10-20 uses or if you notice resistance during operation.

Yes, it is effective for various hose types, provided the diameter falls within the supported range.

Check the hydraulic fluid level or bleed the hydraulic system to ensure no air bubbles are trapped inside the pump.

Ensure the dies are seated correctly in the 8-petal structure and that the hose is centered perfectly within the die set before activating the pump.

Clean any metallic dust or dirt from the adjustment threads and apply a light coating of machine lubricant.