Draper Wet and Dry Bench Grinder - 350W

Dress the wheels as needed, usually when the surface becomes uneven or clogged. The wet wheel may need more frequent dressing.

Always wear eye protection and consider using a face shield. Protective gloves and a dust mask are also recommended.

Yes, but it requires practice and a proper jig for accurate sharpening.

Keep the wet wheel clean, regularly check the water reservoir, and replace the water as needed. Dress the wheel to maintain its surface.

The wet whetstone wheel rotates at 320rpm, and the dry white stone wheel at 2850rpm. Make sure the wheels are rotating at the correct speed to ensure safety and prevent damage.

Replacement wheels can be found at most hardware stores or online retailers that sell Draper products.

Turn off the grinder and let it cool down. Check for any obstructions or overloading. If the problem persists, consult a qualified technician.

Check the power supply and ensure the plug is properly connected. Also, check the fuse.

Check if the wheels are properly mounted and balanced. Replace worn or damaged wheels.

Sharpen the wheel with a dressing tool and ensure the tool rest is correctly positioned and the wheel is appropriate for the material.

Adjust the spark deflectors and ensure proper safety measures are in place, like eye protection.