Cramer Rotating Silicone Nozzle - 4 Pack

The nozzle is compatible with most standard silicone and sealant cartridges that fit the coarse thread.

Wipe the nozzle clean after each use with a cloth. If sealant has dried, carefully remove it with a tool without damaging the nozzle.

Use the 45-degree cutting marks on the nozzle tip to adjust the opening size. The smaller the opening, the less sealant dispensed.

The nozzle is designed to fit common plastic cartridges with coarse threads, but it may not be suitable for all sizes or materials.

The swivel allows the nozzle to rotate freely, enabling you to apply sealant at any angle without changing your grip.

Store the nozzle attached to a cartridge with the screw cap in place to prevent the sealant from drying out. Store the sealant in a cool, dry place.

If the nozzle clogs, try clearing it with a pin or wire. If the clog is severe, consider replacing the nozzle or the entire cartridge.

Check for dried sealant and clean the swivel mechanism.

Ensure the nozzle tip is cut correctly and that the cartridge is properly seated.

Make sure the nozzle is securely attached to the cartridge. If the leak persists, replace the nozzle or cartridge.