Best current price£6.22from www.lindy.co.uk
Shopping.co.uk recommended and popular offers
www.lindy.co.uk£6.22Visit shop 1m IEC Splitter Cable IEC C14 to 2 x IEC C13
Visit shop
Amazon£6.29Visit shop Lindy 1m IEC C14 to 2 x IEC C13 Splitter Power Extension Cable, Black
Visit shop18 offers from £6.22 - £15.15
View price history by clicking the chart icon.
This Lindy 1m IEC splitter cable is designed for users needing to power multiple devices from a single IEC C14 power source. Its primary benefit is consolidating power connections, ideal for workstations, entertainment setups, or office environments. A key consideration is its use in dry areas only, with a maximum load of 10A/250V.
| Model Part Number | 30363 |
|---|---|
| Brand | Lindy |
This cable is rated for a maximum of 10A and 250V.
No, this cable is intended for use in dry areas only and should not be exposed to moisture.
You can connect any devices that use a standard IEC C13 power cord, such as PCs, monitors, printers, audio equipment, and projectors, provided their combined power draw does not exceed 10A.
The Lindy IEC splitter cable comes with a 10-year warranty.
Yes, the brass used in the connectors contains less than 0.1% lead and is SVHC-free.
The IEC C14 is the male connector that typically plugs into a power source or an appliance, while the IEC C13 is the female connector found on most standard power cords for devices like computers and monitors.
Verify that the IEC C14 plug is securely inserted into the power source. Check that the IEC C13 plugs are firmly seated in the splitter cable. Ensure the power source itself is active and the connected devices are functioning.
Confirm that the total power draw of the connected devices does not exceed the 10A/250V limit. Check for any damage to the cable or connectors and replace if necessary.
Immediately disconnect the cable and connected devices. This may indicate an overload. Ensure the total amperage draw is within the specified limits. Inspect the cable for damage.
Setup: Simply plug the IEC C14 connector into a compatible IEC C14 power outlet or female connector. Then, connect the power cords of up to two devices (each requiring an IEC C13 female connector) into the two IEC C13 female sockets on the splitter cable. Ensure the total power draw of the connected devices does not exceed the cable's rating of 10A/250V.
Compatibility: This cable is compatible with any device featuring a standard IEC C13 power inlet. The IEC C14 male connector is designed to fit into standard IEC C14 female outlets.
Care: This cable is intended for use in dry areas only. To clean, unplug the cable from all power sources and wipe gently with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the cable is completely dry before plugging it back in.
