Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader - Lexar

The Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader supports microSD (TransFlash), microSDHC, microSDXC, SD, SDHC, SDXC and CompactFlash cards.

The data transfer rate is up to 170 Mbit/s.

The maximum transfer speed for SD and microSD cards is up to 312MB/s.

The maximum transfer speed for CompactFlash cards is up to 160MB/s.

No, the Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader is plug-and-play and does not require any driver installation for most operating systems.

The reader uses a USB 3.2 Gen 1 (3.1 Gen 1) Type-C interface.

The operating temperature range is 0 - 40 °C.

The package includes the Lexar Professional Multi-Card 3-in-1 USB 3.1 Reader and a USB Type-A to USB Type-C cable.

Ensure the card reader is properly connected to the computer via the USB cable. Try a different USB port. Check if the memory card is correctly inserted. Reboot your computer.

Verify that your computer has a USB 3.1 or 3.2 Gen 1 (3.1 Gen 1) Type-C port. Check the speed rating of your memory card; slower cards will result in slower transfer times.

Make sure the memory card is correctly inserted into the appropriate slot. Try inserting the card into another device to check if the card itself is functional.

Ensure the card reader is connected properly to the computer. If the problem persists, the reader may have a hardware issue.