Power Extension Cable - White

It's commonly known as a kettle lead extension cable and is used to extend the length of the power cord for devices like PC towers, monitors, printers, and other office equipment that use a standard C13 power input.

This cable is rated for a maximum input of 10 Amps (A) and 250 Volts (V), with a 0.75mm² core. It is suitable for most standard office electronics but check your device's power consumption.

While it can technically connect them, it's best suited for standard office use. For high-performance gaming PCs or laser printers that may have higher power demands, ensure their requirements do not exceed the cable's 10A rating. If in doubt, use a cable with a thicker core (e.g., 1.0mm²).

Yes, the C14 connector is male and plugs into the wall or power strip, while the C13 connector is female and accepts the appliance's power cord.

Wipe the cable and connectors with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners. Ensure the cable is completely dry before use.

This refers to the cross-sectional area of the copper conductors inside the cable. A 0.75mm² core is standard for many power applications and supports up to 10A at 250V.

Specific warranty information is typically provided by the retailer. Please check the product packaging or the retailer's website for warranty details.

Check that all connections are secure: the extension cable is fully plugged into the wall socket/power strip, and the appliance's power cord is firmly connected to the extension cable. Ensure the wall socket is functional by testing another device.

Gently inspect the C13 female connector on the extension cable for any debris or damage. Ensure the appliance's C14 male plug is inserted fully and straight into the cable's C13 socket.

While some warmth can be normal, excessive heat may indicate the cable is being used with an appliance drawing more power than it's rated for. Disconnect immediately and verify the appliance's power draw against the cable's 10A rating.