Knipex Open-end wrench - 98 00 10

VDE/1000V approved signifies that the tool has been tested and certified by VDE (Association for Electrical, Electronic & Information Technologies) to be safe for use on live electrical systems up to 1000 volts AC or 1500 volts DC. This insulation protects the user from electric shock.

This wrench is designed for standard 10mm nuts and bolts. It may not fit specialized or oversized 10mm fasteners. Always ensure a snug fit before applying torque.

The 15-degree angle provides an offset grip, which is crucial for reaching fasteners located in tight or recessed areas where a straight wrench would not fit or allow for sufficient turning motion.

Chrome vanadium steel is known for its high strength, hardness, and resistance to wear and corrosion. This makes the wrench very durable for regular professional use.

The head thickness (a) is a maximum of 5.0 mm, and head thickness (B) is a maximum of 27.0 mm. This allows it to fit into tighter spaces compared to thicker-headed wrenches.

No, this is a fixed-size open-end wrench with a specific 10mm jaw size. For different fastener sizes, you would need other Knipex wrenches in their respective sizes.

Clean the wrench with a dry or slightly damp cloth after use and ensure it is completely dry before storing. Store it in a dry place to prevent rust and maintain the chrome finish.

Ensure you are using the correct 10mm size for the fastener. Check that the fastener head is not damaged or rounded. Clean both the wrench jaws and the fastener head.

Utilize the 15-degree angled jaw to gain better access. If the head thickness is still too large, consider a different Knipex wrench profile or specialized tool.

Clean the affected area with a soft brush or cloth. Apply a light coating of rust inhibitor or a penetrating oil, then wipe clean. Ensure proper dry storage in the future.

Discontinue use immediately for any electrical work. The VDE rating is compromised. Replace the tool to ensure safety.