DJI Osmo Action Suction Cup Mount

You can mount it on smooth, flat, non-porous surfaces such as glass (windshields, windows), smooth plastic, and polished metal. Avoid rough, textured, or porous surfaces.

No, this mount is only suitable for speeds below 80 kph (50 mph) when attached to the exterior of vehicles and is recommended for non-impact activities. For higher speeds or more demanding situations, alternative mounting solutions may be necessary.

Rinse the suction cup with clean water and let it air dry. Avoid using soap or abrasive cleaners, as they can degrade the material and affect its adhesion.

Yes, but only on flat, smooth surfaces and at low speeds (below 80 kph/50 mph), similar to car usage. It is also highly recommended to use a safety tether.

The packaging includes the Osmo Action Suction Cup Mount and an Osmo Locking Screw.

The standard packaging does not explicitly list a safety tether. However, it is strongly recommended to use one, especially when attaching the mount to vehicles.

The mount measures approximately 137.1 mm in depth, 93.5 mm in width, and 85 mm in height, and weighs 148 g.

Ensure the mounting surface and the suction cup are clean, dry, and free from dust or debris. Slightly dampen the suction cup with water and press firmly to create a seal.

Tighten the adjustment knobs on the ball joints. Ensure the camera is securely screwed onto the mount. If the issue persists, inspect the ball joints for wear.

Verify that the mount is used on a compatible smooth, non-porous surface and within recommended speed limits for vehicle use. Always use a safety tether for added security.

While designed to prevent residue, ensure the surface was clean before attachment. Clean the surface with a mild cleaner if any residue remains.