Internal White Primed Pattern 10 Door - White

White primed means the door has a base layer of primer applied, making it ready for you to apply your final coat of paint in any color you choose.

Due to the clear glass pane, this door is generally not recommended for bathrooms or other areas where privacy is essential, unless an alternative privacy solution is implemented.

The Pattern 10 door is typically non-handed, meaning it can be hung to open from either the left or the right, depending on your needs and how the hinges are installed.

The exact dimensions of the glass pane can vary slightly by manufacturer, but the Pattern 10 design is characterized by a large central glazed area. Please refer to specific product technical specifications for precise measurements.

Lightly sand the primed surface with fine-grit sandpaper, wipe away any dust with a tack cloth, and then apply your chosen paint according to the paint manufacturer's instructions.

Information regarding core construction (solid or hollow) is typically found in the detailed product specifications. This door is designed for internal use and offers a balance of lightness and durability.

Check if the door is rubbing against the frame. Minor adjustments may be needed by shaving the edges or re-aligning hinges.

Ensure the surface was properly prepared before painting and that an appropriate primer was used. Apply thin, even coats of paint, allowing sufficient drying time between layers.

Use a dedicated glass cleaner and a lint-free cloth. Wipe in a consistent direction (e.g., horizontal or vertical) to avoid streaks.