Candy Dishwasher - White - Slimline

Remove the filters from the bottom of the dishwasher. Rinse them under running water to remove debris. Reassemble and put them back in the dishwasher.

Select your wash program, press the delay start button, and use the controls to set the desired delay time (up to 9 hours). Press start.

Use a detergent specifically designed for dishwashers. Follow the detergent instructions for the correct amount.

The rinse aid indicator on the control panel will alert you when to refill the dispenser. Check the level periodically.

This could be due to hard water or insufficient rinse aid. Add dishwasher salt if you have hard water and ensure the rinse aid dispenser is full.

The Quick 45°C cycle is for lightly soiled dishes and provides a fast wash.

The model number can be found on a sticker inside the dishwasher door or on the side.

Check that the dishwasher is properly plugged in and the power switch is on. Ensure the door is closed securely.

Check that the spray arms are not blocked, the filters are clean, and you are using the correct amount of detergent. Select an appropriate wash program for the soil level.

Check the door seal for any damage and ensure that the dishwasher is level. Check the water supply hose connection.

Make sure that rinse aid is filled in the dispenser. Ensure dishes are loaded correctly to allow for proper air circulation.

Check if any items are obstructing the spray arms or if the pump is making the noise. Make sure the dishwasher is leveled properly.