Best current price£7.25from Rackhams
Shopping.co.uk recommended and popular offers
Rackhams£7.25Visit shop Osmo Decking Oil - Bangkirai 006 - 5Ml - Sample Sachet
Visit shop
B&Q£7.57Visit shop B&Q - Decking Oil 006 Bangkirai5Ml
Visit shop3 offers from £7.25 - £7.57
View price history by clicking the chart icon.
Osmo Decking Oil Bangkirai is designed for homeowners and decking contractors who want a high-performance, transparent finish to nourish and protect exterior wood surfaces. Its unique blend of vegetable oils and waxes deeply penetrates wood fibers, offering superior water repellency and UV resistance to prevent drying and cracking, though users should be prepared for the drying time required between thin, even application coats.
| Model Part Number | 006 |
|---|---|
| Brand | Osmo |
While specifically pigmented for Bangkirai, the oil properties are suitable for many hardwoods, but always perform a test patch first.
Re-application depends on exposure to the elements, but typically every 12 to 24 months for high-traffic areas.
If the wood is clean and porous, no sanding is required. If the surface is weathered or has old finish, sand it down to bare, clean wood.
Once fully cured, the finish is safe for humans, animals, and plants.
Use a specialized solvent-free brush cleaner or a dedicated white spirit-based cleaner.
The coat was likely applied too thickly. Wipe off excess oil with a lint-free cloth and allow more ventilation and time for the remaining oil to cure.
This often occurs if the surface was not cleaned uniformly or if the wood had varying absorption rates. Apply an additional thin, even coat to even out the finish.
Before application, ensure the decking surface is free of dirt, moss, or old paint residues. If the wood has been previously finished with a film-forming coating, this must be sanded off first. Apply the oil using a stiff brush or a specialized floor brush in thin layers. Ensure the wood is completely dry, with no frost present, before starting the project. During the drying phase, avoid high humidity and heavy foot traffic. Maintenance is simple: once the wood shows signs of wear or water no longer beads on the surface, clean the area and apply a fresh, thin coat of oil to refresh the protection without needing to strip the previous layer.
