Best current price£201.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£201.00Visit shop - Expona Commercial 5102 Iron Ore Dark Grey Stone Effect Glue Down Luxury Vinyl Tile -(2.5mm Lvt)-3.34M² Per Pack
Visit shop2 offers from £201.00
View price history by clicking the chart icon.
The Expona Commercial Wood Effect Glue Down Luxury Vinyl Tile (5102 Iron Stone) is designed for homeowners and designers seeking a realistic wood aesthetic with enhanced durability. Its key benefit is providing the sophisticated look of natural oak brown wood with superior resistance to scratches, stains, slips, and water, ideal for high-traffic and moisture-prone areas. A potential caveat is that its slim profile, while beneficial for renovations, requires a perfectly smooth subfloor for proper glue-down installation.
| Model Part Number | 5102 |
|---|---|
| Brand | Expona |
The primary benefit is achieving a realistic wood look with superior durability, water resistance, and low maintenance compared to natural wood flooring.
Yes, its water-resistant properties make it an excellent choice for moisture-prone areas like bathrooms and kitchens.
The subfloor must be clean, dry, smooth, and level. Any bumps, cracks, or debris need to be addressed before applying adhesive and tiles.
Yes, it can be installed over many existing hard-surface floors, provided they are smooth, level, and well-adhered. Always check specific compatibility and preparation guidelines.
The Expona Commercial Wood Effect LVT comes with a 10-year warranty.
The tile has a slim profile of 2.5mm.
Use a mild, pH-neutral floor cleaner diluted in water. Avoid abrasive cleaners or excessive water.
Ensure the subfloor is perfectly smooth, clean, and dry. Verify the correct type and amount of adhesive were used and applied according to manufacturer instructions. Check if the adhesive has reached its 'open time' before laying tiles.
This may indicate insufficient adhesive, improper subfloor preparation, or premature foot traffic. Carefully lift the affected tile, remove old adhesive, prepare the subfloor if necessary, and re-adhere using fresh adhesive, ensuring firm pressure.
While scratch-resistant, heavy abrasion can still occur. Use felt pads on furniture legs. For minor scuffs, try cleaning with a soft cloth and a mild cleaner. For deeper scratches, individual tile replacement might be necessary.
This can sometimes happen with new LVT. Ensure the area is well-lit. If it persists after a few weeks of normal use, contact the manufacturer, as it could indicate a defect.
Setup: Ensure the subfloor is clean, dry, smooth, and level before installation. Any imperfections in the subfloor can telegraph through the vinyl. Acclimate the tiles to the room environment for at least 48 hours before installation. Cut tiles using a sharp utility knife and a straight edge. Apply appropriate vinyl flooring adhesive evenly to the subfloor following the adhesive manufacturer's instructions.
Compatibility: Suitable for use with underfloor heating systems, provided the temperature at the adhesive layer does not exceed manufacturer guidelines (typically 27°C / 81°F). It is compatible with most standard residential and commercial subfloors, including concrete, plywood, and existing resilient flooring, provided they meet the preparation requirements.
Care: For daily cleaning, sweep or vacuum the floor to remove loose dirt and debris. For deeper cleaning, use a damp mop with a mild, pH-neutral floor cleaner. Avoid using abrasive cleaners, steel wool, or excessive water, as these can damage the surface or adhesive. Promptly wipe up spills to prevent staining or water seepage.
