Best current price£6.56from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.56Visit shop B&Q - Tct Panel Pilot Router Bit Cutting Tool 6.35mm D 45 Degree Angle 1/2 Shank
Visit shop2 offers from £6.56
View price history by clicking the chart icon.
The AB Tools TCT Panel Pilot Router Bit is a professional-grade cutting tool designed for woodworkers, cabinet makers, and DIY enthusiasts who require precision in trimming laminate, pattern work, and edge profiling. Its primary benefit is the ability to deliver clean, splinter-free finishes on hardwoods, softwoods, MDF, and chip wood thanks to its high hook and shear angles. While it offers exceptional versatility with dual-surface cutting edges, users should note that it requires a router compatible with a 1/2-inch collet, which may limit compatibility with smaller trim routers.
| Model Part Number | TE535_F |
|---|---|
| Brand | AB Tools |
No, this bit features a 1/2 inch shank and cannot be used in a 1/4 inch collet router without risking serious damage or injury.
It is optimized for chip wood, MDF, hardwood, and softwood, making it ideal for laminate countertops and pattern routing.
The top edge acts as a pilot, allowing the bit to plunge into the material or start a cut accurately before the side edge trims the profile.
The bit provides a 5mm cutting depth on the top and 20mm of cutting length along the side.
Yes, it is designed for both commercial and occasional use, offering professional results regardless of the frequency of operation.
Ensure the shank is fully seated and the collet nut is tightened correctly. Check that the router collet is not worn or dirty.
Reduce the feed speed slightly or check if the carbide edges have accumulated resin that needs to be cleaned off.
Verify that your cut direction follows the grain whenever possible and ensure the router base is kept perfectly flat against the workpiece surface.
To install, ensure your router is unplugged, then insert the 1/2-inch shank into the collet until it bottoms out and then pull back slightly to account for thermal expansion before tightening securely. This bit is designed for heavy-duty stationary routers or large handheld routers capable of accepting 1/2-inch shanks. To maintain the tool, always clear away resin and dust buildup using a specialized router bit cleaner or a light solvent after each use. Store the bit in a protective case to prevent edge chipping, and periodically inspect the carbide teeth for signs of dulling or nicks that could affect cut quality.
