Best current price£18.99from eBay
Shopping.co.uk recommended and popular offers
eBay£18.99Visit shop 4x Bartoline 1876 Caulk Flexible Filler Decorators Acrylic Sealant Gaps 310mL
Visit shop
B&Q£24.99Visit shop B&Q - 4X 1876 Caulk Flexible Filler Decorators Acrylic Sealant Gaps 310Ml
Visit shop3 offers from £18.99 - £24.99
View price history by clicking the chart icon.
Bartoline Flexible Decorators Caulk is designed for professional decorators and DIY enthusiasts who need a reliable solution for sealing joints around frames, skirtings, and architraves. Its primary benefit is the advanced acrylic elastomer technology that offers superior flexibility and color stability, though users should note it requires a standard cartridge gun for application and is not suitable for areas subject to constant water immersion.
| Model Part Number | DC0090 |
|---|---|
| Brand | Bartoline |
No, this product is specifically formulated for interior use and is not suitable for exterior environments or areas exposed to rain.
You can apply waterborne paints after 1 hour. Solvent-based paints should only be applied once the caulk has fully cured.
It is not designed for wet rooms or areas subject to constant water contact. Use a dedicated silicone sealant for showers or sinks.
A wetted profiling tool or a damp finger is sufficient to smooth the bead within 10 minutes of application.
No, the product is formulated with excellent color stability to minimize yellowing under normal interior conditions.
It is generally intended for standard gap filling. For very wide gaps, you may need a backer rod to support the caulk.
Ensure the surface was free of dust and debris. If the gap is excessively deep, use a foam backer rod to fill the void before applying the caulk.
This typically occurs if the caulk has not fully cured or was painted too early. Allow more curing time, especially if using solvent-based paints.
Ensure the nozzle is cut sufficiently and the cartridge gun plunger is properly aligned. If the product feels too cold, warm it slightly to room temperature.
Before starting, ensure that all surfaces are sound, dry, and clean. Remove any loose paint or old caulk residue. Cut the nozzle at a 45-degree angle to match the width of the gap you intend to fill. Load the 310ml cartridge into a standard sealant gun and apply steady pressure to ensure a uniform bead. If you are using waterborne emulsion paints, you can begin painting after 1 hour. For solvent-based paints, allow the caulk to fully cure to prevent potential finish issues. Store remaining cartridges in a cool, dry place and ensure the nozzle is sealed or replaced to prevent the product from drying out inside the tube.
