The ECO-WORTHY flexible solar panel is designed for versatile installation on irregular surfaces s...The ECO-WORTHY flexible solar panel is designed for versatile installation on irregular surfaces such as vans, motorhomes, boats, cabins, tents, cars, trucks, trailers, yachts, and roofs. Upgraded to 130W, this panel offers a 30% increase in power generation compared to 100W models, capable of producing up to 520Wh per day under optimal conditions. The panel features an ultra-thin and lightweight design, constructed with advanced polymer materials that make it 70% lighter than traditional glass panels for easier transport and installation. It is fully waterproof with a pre-installed junction box and diodes. The unit includes 2.9Ft cables for series or parallel connections and features 4 pre-drilled, metal-reinforced holes for mounting via adhesive, silicone, double-sided tape, or cable ties.
The ECO-WORTHY 130W Flexible Solar Panel is ideal for van lifers, boaters, and off-grid enthusiasts who need a reliable, lightweight power source that conforms to irregular surfaces. It offers a significant 30% power boost over standard 100W models for better charging efficiency, though users should be aware that flexible panels are generally less durable over the long term compared to rigid glass alternatives when subjected to extreme flexing.
All features
Model Part Number
L02AM130W18V-1
Brand
ECO-WORTHY
Extended Product Information
FAQs
Can I walk on these panels?
No. While flexible, these panels are not designed to support foot traffic. Stepping on them can cause micro-cracks in the internal cells.
What kind of mounting adhesive should I use?
Professional-grade, weather-resistant silicone or high-bond structural adhesive tape is recommended for exterior van or boat installations.
Can I connect this to a 24V system?
This is a 12V panel. To use it in a 24V system, you must connect at least two panels in series and use a compatible MPPT solar charge controller.
How flexible are these panels?
They are designed to conform to the curvature of most standard motorhome or boat roofs, but they should never be bent beyond a slight radius to avoid internal damage.
Does it come with a charge controller?
No, this listing is for the solar panel only. You will need to purchase a compatible solar charge controller separately.
Troubleshooting
Panel is outputting lower than expected voltage
Check for partial shading or dirt buildup on the panel surface; even minor shading can significantly reduce output.
No power detected at the charge controller
Verify all cable connections are secure and inspect the wires for any breaks or kinks. Ensure the charge controller is compatible with the panel's 12V output.
Pros and Cons
Pros
Significantly lighter than glass-based solar panels
Easily mounts to curved or irregular surfaces like van roofs
Provides higher wattage output than standard entry-level panels
Durable, waterproof design suitable for marine and outdoor use
Flexible mounting hardware options included
Cons
Flexible construction may be less puncture-resistant than rigid glass
Limited cable length (2.9Ft) may require extension cables for larger installations
Requires careful installation to avoid delamination or micro-cracking from excessive bending
Setup, Compatibility & Care
Installation Steps
Prepare the mounting surface by ensuring it is clean, dry, and free of debris.
Determine the mounting method (adhesive or cable ties). If using adhesive, apply a thin, even layer of professional-grade silicone or solar-specific tape to the back of the panel.
Position the panel and press firmly, ensuring no air bubbles are trapped beneath the polymer surface.
Connect the 2.9Ft leads to your charge controller. Ensure proper polarity before finalizing connections.
Care Instructions
Clean the panel periodically with a soft cloth and mild soap to remove dust, pollen, or salt spray.
Avoid stepping on the panel, as concentrated pressure can damage internal cells.
Regularly check cables and junction box connections for signs of wear or degradation due to UV exposure.