Best current price£6.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.99Visit shop B&Q - 1 X 260Ml High Power Instant Grab Interior Adhesive For Diy Mounting & Repair Jobs
Visit shop18 offers from £6.99 - £28.30
View price history by clicking the chart icon.
This High Power Instant Grab Interior Adhesive from STORM TRADING GROUP is designed for DIY enthusiasts and home renovators seeking a mess-free and efficient way to install interior decorative items. Its key benefit is the powerful initial bond, allowing immediate securing of materials without screws, nails, or clamps. A potential caveat is its suitability primarily for interior decorative applications, not structural loads. This adhesive offers a cleaner, quicker, and less messy alternative to traditional fixings, ideal for items like coving, dado rails, skirting boards, and architraves.
| Brand | STORM TRADING GROUP |
|---|
No, this adhesive is specifically formulated for interior decorative applications and is not suitable for outdoor use or exposure to the elements.
It is suitable for most common interior building materials such as wood, plaster, brick, concrete, metal, and rigid plastics. Ensure surfaces are clean and dry.
While the initial grab is instant, full strength and cure time can vary depending on environmental conditions and the materials bonded, typically taking 24-48 hours for a complete cure.
No, this adhesive is designed for decorative interior items like mouldings and trim, not for structural repairs or load-bearing applications.
Wipe away any uncured adhesive immediately with a damp cloth or the solvent recommended on the product packaging. Cured adhesive is much harder to remove.
Thanks to its instant grab strength, you generally do not need clamps or temporary support for most interior decorative items, as it holds them in place immediately.
Ensure the nozzle is clear. If using a cartridge, make sure it is properly loaded into a caulking gun and the seal has been broken.
Ensure surfaces are clean, dry, and free from dust or grease. Apply sufficient adhesive and press surfaces together firmly. Check application temperature is within recommended range.
This can be normal for instant grab adhesives. Minimize stringing by using a quick, decisive application motion and drawing the nozzle away sharply.
Due to the instant grab, repositioning is limited once the items are pressed together. Ensure accurate placement before applying firm pressure.
Setup: This product is ready to use directly from its packaging. Ensure the application surface and the item to be bonded are clean, dry, and free from dust, grease, or loose particles. For best results, apply the adhesive in a continuous bead or pattern to one surface. Once applied, press the two surfaces together firmly within the initial tack time, holding them in place for a few seconds to ensure the initial grab engages.
Compatibility: Suitable for bonding a wide range of common interior building materials including wood, plaster, brick, concrete, metal, and rigid plastics. It is designed for decorative interior applications. Avoid using on surfaces that may be damaged by solvents or for applications involving continuous water immersion or structural loads.
Care: Store the adhesive in its original container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the nozzle or cap is sealed properly after use to prevent the product from drying out. Clean up any excess uncured adhesive immediately with a damp cloth or appropriate solvent as recommended by the manufacturer on the product packaging. Cured adhesive may be difficult to remove.
