Saber Paint Spray Gun - 18V Bare Unit

The Saber 18V Paint Spray Gun is suitable for use with a variety of paints, stains, and sealers. Always check the paint manufacturer's recommendations for spray gun compatibility and thinning instructions.

After each use, disassemble the spray gun and clean all components thoroughly with the appropriate solvent for the paint you used. Follow the detailed cleaning instructions in the product manual.

No, this is a bare unit and requires a compatible Saber 18V battery, which is sold separately.

The paint reservoir has a 1.2-litre capacity.

Use the adjustable flow regulator dial to control the amount of paint being sprayed.

Replacement parts can be found through authorized Saber retailers or online.

Disassemble the spray gun and clean the nozzle and air cap thoroughly. Soaking the parts in a solvent can help remove stubborn clogs. Ensure the paint is properly thinned.

Check the paint reservoir for sufficient paint. Ensure the nozzle is not clogged and clean it if necessary. Check that the battery is properly connected and charged.

Adjust the flow regulator to increase or decrease the paint flow. Clean the nozzle and air cap. Make sure the paint is properly thinned.

Reduce the paint flow rate. Apply thinner coats, allowing each coat to dry before applying the next. Maintain a consistent distance and speed when spraying.