AK Interactive Model Paint - Dark Aluminium

Yes, the water-soluble nature and odorless formula make it beginner-friendly. The dropper bottle also aids in controlled application.

It adheres well to most model plastics, resin, and metal. Priming is recommended for optimal results, especially on very smooth or non-porous surfaces.

Drying time varies depending on application thickness and environmental conditions. It's generally touch-dry within minutes, but allow several hours for a full cure before handling or applying further coats.

While it can be mixed with other water-based acrylics, results may vary. It's best to test compatibility on a scrap piece first. It is not recommended to mix with solvent-based paints.

As the paint is water-soluble, clean spills and mistakes with water immediately after application. For dried paint, use an acrylic paint remover or isopropyl alcohol.

Yes, this paint features a metallic finish that provides a realistic aluminum look when applied.

Shake the bottle more vigorously. If the issue persists, try adding a small amount of distilled water or acrylic thinner to loosen the consistency.

Ensure the surface is clean and free of dust or grease. Apply a primer specifically designed for acrylic paints before applying the Dark Aluminium. Reapply with a thinner coat if issues occur during application.

Ensure the paint is properly thinned. Clean your airbrush thoroughly after each use. Disassemble and clean the airbrush nozzle and needle if clogging persists.

Thin the paint slightly more. Apply multiple thin coats rather than one thick coat. Use a soft, high-quality brush and stipple or use light, even strokes.