Tamron Lens Hood - A063
Best current price£32.99from Wex Photo Video
Best offers
Shopping.co.uk recommended and popular offers
Wex Photo Video£32.99Visit shop Tamron HA063 Lens Hood
Visit shopWex Photo Video£32.99Visit shop One Offer
1 offer from £32.99
View price history by clicking the chart icon.
Product Information
Full details
This guide is for photographers using the Tamron 28-75mm f2.8 Di III VXD G2 lens who want to improve image quality by reducing lens flare and protect their front lens element. The key benefit is enhanced contrast and reduced aberrations in various lighting conditions. A minor caveat is that it's lens-specific. This dedicated lens hood is designed to block stray light, ensuring optimal image contrast, and acts as a physical barrier against accidental impacts, maintaining the integrity of your lens.
All features
| Brand | Tamron |
|---|
Extended Product Information
FAQs
What lens is this hood designed for?
This lens hood is specifically designed for the Tamron 28-75mm f2.8 Di III VXD G2 lens.
Can I use this hood with other Tamron lenses?
No, this hood has a dedicated bayonet mount and is only compatible with the Tamron 28-75mm f2.8 Di III VXD G2.
Will this hood cause dark corners (vignetting) in my photos?
The petal-shaped design is engineered to minimize or eliminate vignetting, especially at wider focal lengths. However, extreme angles or certain filter combinations might still cause slight darkening.
Can the hood be attached backwards for storage?
Yes, the hood is designed to be reversed and attached to the front of the lens for more compact storage and transportation.
Does the hood offer protection to the lens?
Yes, it provides a physical barrier that helps protect the front lens element from accidental bumps, scratches, and smudges.
How should I clean the lens hood?
Use a soft, dry microfiber cloth. For tougher smudges, a slightly damp cloth (water only) can be used, followed by air drying.
What is the primary benefit of using this lens hood?
The primary benefit is reducing lens flare and improving image contrast by blocking stray light from entering the lens.
Troubleshooting
Hood does not attach securely
Ensure you are using the correct lens model (Tamron 28-75mm f2.8 Di III VXD G2). Check for any debris in the bayonet mount on both the lens and the hood. Realign the guides and twist firmly until it clicks into place.
Hood causes vignetting (dark corners) in photos
Confirm the hood is fully locked onto the lens. The petal design is intended to prevent vignetting, but ensure it's not obstructed. If vignetting persists, especially at the widest focal length (28mm), you may need to remove the hood for specific shots or consider shooting at slightly longer focal lengths.
Hood feels loose after attachment
Re-attach the hood, ensuring it clicks into its locked position. If it continues to feel loose, there might be a manufacturing defect; consider contacting customer support.
Pros and Cons
Pros
- Significantly reduces lens flare and ghosting.
- Improves image contrast and color saturation.
- Offers physical protection to the front lens element.
- Secure and precise fit due to dedicated bayonet mount.
- Compact and reversible for convenient storage.
- Designed to prevent vignetting.
Cons
- Only compatible with the Tamron 28-75mm f2.8 Di III VXD G2 lens.
- Adds some bulk to the lens when attached.
- May require removal for certain filter types or accessory attachments.
- Can be misplaced if not stored properly when reversed.
Setup, Compatibility & Care
Compatibility:
This lens hood is specifically designed for the Tamron 28-75mm f2.8 Di III VXD G2 lens. It will not fit other lens models correctly.
Setup:
- Identify the bayonet mount points on both the lens and the hood.
- Align the guides on the hood with the corresponding slots on the lens.
- Gently push the hood onto the lens mount.
- Twist the hood clockwise until it locks securely into place. You should feel a distinct click.
Reversing for Storage:
- Once detached, rotate the hood 180 degrees.
- Align the reversed hood's mount with the front of the lens barrel.
- Slide the hood on and twist it until it feels secure. Most reversed hoods will latch onto a secondary set of grooves on the lens.
Care:
- Cleaning: Wipe the exterior and interior of the hood with a soft, dry microfiber cloth to remove dust and fingerprints. For stubborn marks, use a slightly damp cloth (water only) and allow it to air dry completely before reattaching.
- Storage: When not in use or when reversed for transport, store the hood in a clean, dry place. Avoid placing heavy objects on top of it, especially when reversed on the lens, to prevent pressure damage.
Similar items
Sigma Lens Hood - LH830-03From £21
Sony Lens Hood - ALC-SH136From £35
Sony Lens Hood - SEL20F18GFrom £46
Sigma LH876-02 Lens Hood - SigmaFrom £27
Sony Lens Hood - SEL2070GFrom £41
Sony Lens Hood - SEL35F18FFrom £40
Sony Lens Hood - SEL24F14GMFrom £59
Canon EW-82 Lens HoodFrom £45
Canon EW 88D Lens Hood - EF 16-35mm f/2.8L III USM LensFrom £55
Sony Lens Hood - ALC-SH178From £49
Sigma LH878-05 Lens HoodFrom £39
Sigma Lens Hood LH706-01 - Petal TypeFrom £33