Dekton Drain Auger Unblocker - 7m

You need a standard electric or air-powered drill with a forward rotation setting. The drill should have a chuck capable of securing the hex adapter.

The auger features an integrated hex adapter that simply slots into your drill's chuck. Tighten the chuck securely around the adapter.

It is suitable for most household plumbing like sinks, baths, toilets, and showers. Exercise caution with very old or fragile pipes, and avoid excessive force.

The safety clutch is designed to disengage the rotating coil if it becomes snagged or jams, preventing damage to the auger, the drill, and your plumbing system.

The flexible steel wire coil is 7 meters (approximately 23 feet) long, allowing it to reach deep into most standard household drain systems.

Immediately stop the drill and try to gently pull the auger back. If it remains stuck, you may need to try reversing the drill's rotation slightly. If it continues to be jammed, cease use and consider professional assistance.

No, the electric or air-powered drill is not included with the Dekton Drain Auger Unblocker. You will need to provide your own compatible drill.

Ensure the drill is set to forward rotation. Check that the hex adapter is securely tightened in the drill chuck. Verify the drill has sufficient power.

Immediately stop the drill. Attempt to slowly pull the coil back out. If it remains stuck, try reversing the drill's rotation briefly. If still jammed, the safety clutch may have engaged; disengage the drill and try to free the coil manually or consider it may be a severe blockage requiring professional attention.

The blockage may be too severe or too far into the system for the auger. Ensure the coil was extended sufficiently to reach the obstruction. Consider using a drain cleaner or contacting a professional plumber.

Confirm you are using the correct hex adapter (standard size). Ensure your drill's chuck is fully opened to accept the adapter. If the adapter is damaged, it may need replacement.