Best current price£10.80from eBay
Shopping.co.uk recommended and popular offers
eBay£10.80Visit shop Mirka Sanding Block 125 x 60 x 12mm 2 Sided Soft / Hard - 8392202011
Visit shop2 offers from £10.80 - £12.00
View price history by clicking the chart icon.
The Mirka 2-sided sanding block is a versatile, manual abrasive tool designed for professional painters, woodworkers, and automotive detailers who require precise control over surface finishing. Its primary benefit is the dual-density design, which allows for effortless switching between leveling flat surfaces and sanding delicate contours, though users should note it is exclusively designed for manual application and cannot be used with mechanical sanders.
| Model Part Number | 8392202011 |
|---|---|
| Brand | Mirka |
Yes, the materials used in the block are resistant to water, but ensure you thoroughly dry the block after use to prevent abrasive backing degradation.
No, this is a standalone sanding block. You must purchase compatible abrasive sheets separately.
The hard side is typically identifiable by its rigid, dense plastic or foam construction, while the soft side features a noticeably more flexible foam layer.
Yes, this block is fully compatible with Mirka Abranet and other standard hook-and-loop mesh or paper sheets.
With proper cleaning and storage, the block is designed for long-term professional use; however, the foam surface may eventually wear down depending on the frequency and intensity of use.
Ensure the block surface is free of dust and debris before applying the abrasive, or consider using pressure-sensitive adhesive (PSA) backed sheets.
Try holding the block with a 'pinch' grip on the sides rather than a flat palm grip for greater stability.
Verify you are applying pressure to the center of the block and not just the edges; check that the abrasive is flat against the block surface.
To set up the block, simply press your chosen abrasive sheet firmly onto the appropriate side of the block. If using hook-and-loop abrasives, ensure they are centered to prevent edge curling.
Compatibility: This block works with standard 125mm-wide abrasives, though you may need to trim sheets if they exceed the block's length.
Care: To extend the life of the tool, tap off excess dust after each use. If the sanding surface becomes clogged with resin or dust, use a dedicated abrasive cleaning stick to restore the surface tack. Keep the block in a dry, temperate environment to prevent the foam components from degrading.
