Best current price£12.83from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£12.83Visit shop Startech.com Red 10M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. Utp
Visit shop3 offers from £12.83 - £16.65
View price history by clicking the chart icon.
This 10-meter red Slim Cat6 Ethernet cable from StarTech.com is designed for high-density network installations where space and airflow are critical. It offers reliable Gigabit Ethernet connectivity and supports up to 100W of PoE++, making it ideal for powering devices like cameras and switches. While its slim profile enhances airflow and flexibility, users should ensure compatibility with existing network hardware for optimal performance.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT10MRDS |
| Brand | StarTech.com |
The main advantage is its significantly reduced diameter (36% thinner than standard Cat6), which improves airflow, heat dissipation, and flexibility, especially in high-density installations.
This Cat6 cable supports data transfer rates of up to 1000 Mbit/s (Gigabit Ethernet).
Yes, this cable supports PoE++ (IEEE 802.3bt Type 4), capable of delivering up to 100W of power to compatible devices.
LSZH stands for Low Smoke Zero Halogen. It means the cable jacket is designed to emit minimal smoke and no toxic halogenated fumes when exposed to extreme heat or fire, making it safer for use in enclosed or poorly ventilated areas.
This is an Unshielded Twisted Pair (UTP) cable.
The snagless connector has a molded boot that protects the RJ45 clip, preventing it from snagging on other cables or surfaces during installation and reducing the risk of the clip breaking.
The cable uses 28AWG pure bare copper wire for its conductors.
Yes, the cable is Fluke Tested to comply with ANSI/TIA 568 C.2 requirements, ensuring minimal Near-End Crosstalk (NEXT) and Return Loss (RL) for guaranteed Cat6 performance.
Ensure both ends of the cable are securely plugged into the correct ports. Verify that the network devices at both ends are powered on and functioning. Test with a different, known-good Ethernet cable to rule out cable failure.
Check that the cable is not damaged (e.g., crimped, cut). Ensure the cable is properly seated in the ports. Verify that both connected devices support Gigabit Ethernet speeds. If using PoE, ensure sufficient power is being supplied.
Confirm that both the network switch/injector and the powered device are compliant with IEEE 802.3bt PoE++ standards. Check the total power budget of the switch/injector to ensure it can supply the required wattage. Try connecting the device with a different cable to isolate the issue.
Ensure you are using the correct port. The snagless boot on the connector should not impede proper connection. If difficult, inspect the port for debris and the connector for damage. Do not force the connection.
Setup:
This cable is designed for plug-and-play simplicity. Simply connect one RJ45 connector to your network device (e.g., router, switch, computer, camera) and the other RJ45 connector to your network source or destination.
Compatibility:
Care:
