Trend CSB/21060TC saw blade for use in hard and softwoods and sheet materials. Part of the CraftPr...Trend CSB/21060TC saw blade for use in hard and softwoods and sheet materials. Part of the CraftPro range for affordable high quality and consistent performance. With a 20 degree hook and 1.8mm kerf, the CSB/21060TC is a replacement for cordless table saws with 210mm blades, offering an extra fine finish. The ideal blade for the Dewalt DCS7485, the ATB + Raker (Alternative Top Bevel) tooth pattern is perfect for hard and softwoods and sheet materials. Premium quality Micro-granular Tungsten Carbide tips are silver brazed and precision ground for high end performance and edge retention across the board. Precision reamed 30mm bore for ultimate smooth, clean cutting performance. All Trend sawblades are laser etched on the reverse to indicate they meet European Standard EN847-1/2 for the assurance and guarantee of quality. Trend Craft Table Saw Blade 210 x 60T x 30mm CSB/21060TC
TREND CRAFT PRO CSB21060TC 210mm 60TOOTH TCT THIN KERF CIRCULAR SAW BLADE 30MM BORE
QUALITY BLADE
IDEAL FOR THE DEWALT 54V TABLE SAW DCS7485
A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board.
--Reamed bore to ensure precise fit to spindle.
--Silverbraze to ensure tip is bonded securely to body.
--Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2.
--The Trend name for traceability and a guarantee of quality.
--High grade alloy steel plate body precision ground to maintain flatness.
--Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials
KERF 1.8MMATB + R TIPHOOK 20* PLUSEXTRA FINE FINISH
The Trend CSB/21060TC saw blade is designed for woodworkers seeking a professional finish on various materials. It excels in providing an extra fine finish, especially when used with cordless table saws like the Dewalt DCS7485. Keep in mind that blade performance depends on the material being cut and proper saw maintenance. This guide provides detailed information on setup, usage, and care to help you get the most out of your Trend CSB/21060TC saw blade.
All features
Model Part Number
CSB/21060TC
Brand
Trend
Extended Product Information
FAQs
What materials is this blade suitable for?
The Trend CSB/21060TC blade is ideal for hardwoods, softwoods, plywood, and sheet materials.
What is the blade's kerf?
The kerf is 1.8mm.
What is the bore size of the blade?
The bore size is 30mm.
Is this blade suitable for the Dewalt DCS7485?
Yes, this blade is ideal for the Dewalt DCS7485.
How often should I sharpen the blade?
Sharpen the blade when you notice a decrease in cutting performance. The frequency depends on the materials being cut and the amount of use.
What safety precautions should I take when using this blade?
Always wear eye and ear protection. Ensure the material is properly supported. Use a push stick when necessary. Never reach over the blade while it's spinning.
How do I clean the blade?
Use a blade cleaner and a cloth to remove resin and debris. Always unplug the saw before cleaning the blade.
What is the hook angle of the blade?
The hook angle is 20 degrees.
Troubleshooting
Blade is not cutting smoothly.
Check if the blade is dull or damaged. Replace or sharpen the blade. Ensure the material is properly supported during cutting.
Blade binds in the material.
Check that the blade is aligned and that the saw is set up correctly. Ensure the material isn't pinching the blade. Use a push stick and cut at a steady pace.
Excessive tear-out on the cut edge.
Use a slower feed rate. Check if the blade is appropriate for the material being cut. Ensure the blade is sharp.
Saw vibrates excessively during operation.
Ensure the blade is securely mounted. Check for any damage or imbalance on the blade. Check the saw's motor for any issues.
Pros and Cons
Pros
Provides an extra fine finish, ideal for detailed woodworking.
Suitable for a wide range of materials, including hardwoods and sheet materials.
Durable construction with Micro-granular Tungsten Carbide tips.
Precision reamed bore for a secure and smooth fit.
Designed for use with cordless table saws, enhancing portability.
Complies with European safety standards.
Cons
Performance is dependent on the type of material being cut.
May require more frequent sharpening compared to blades designed for specific materials.
Not ideal for extremely abrasive materials.
Thin kerf blades are more prone to deflection than thicker kerf blades, requiring more care during use.
The blade's effectiveness depends on the saw's condition.
Setup, Compatibility & Care
Setup:
Compatibility: Ensure the blade is compatible with your saw. This blade has a 30mm bore and is designed for 210mm blades, ideal for the Dewalt DCS7485.
Installation: Turn off and unplug your saw. Remove the old blade and install the Trend CSB/21060TC, ensuring it's securely fastened according to the saw's instructions.
Check Alignment: Verify the blade is correctly aligned with the saw's fence and miter gauge.
Care:
Cleaning: After each use, clean the blade with a suitable cleaner to remove resin and debris.
Inspection: Regularly inspect the blade for any damage, such as chipped or dull teeth.
Storage: Store the blade in a dry place to prevent rust.
Sharpening: Have the blade professionally sharpened when necessary. Dull blades can lead to poor cuts and safety issues.
eBay£7.69Visit shop 
Amazon£8.97Visit shop 
