36-Pack High-Quality Abs Plastic Welding Rods - ys04663

These welding rods are specifically designed for ABS (Acrylonitrile Butadiene Styrene) plastic.

These rods are optimized for Loops ys04663 and ys04664 Hot Air Guns. While they might work with other compatible models, performance is best guaranteed with the specified Loops models.

Each pack contains 36 high-quality ABS plastic welding rods.

The optimal temperature varies depending on the specific hot air gun and the thickness of the plastic. It's generally recommended to start around 250-300°C (480-570°F) and adjust as needed. Always refer to your hot air gun's manual for precise temperature recommendations.

These rods are formulated for ABS plastic. Using them on other plastic types may result in poor adhesion or material failure.

Store the welding rods in a cool, dry place away from direct sunlight and heat to maintain their integrity.

Increase the temperature setting on your hot air gun. Ensure the gun is providing consistent heat. Check that the rod is fully inserted or positioned correctly for melting.

Ensure the plastic surfaces are clean and free from contaminants. Verify that you are using the correct temperature and sufficient heat to achieve full fusion. Try using a new rod.

This can indicate the temperature is too high. Reduce the heat setting on your hot air gun. Ensure good ventilation in your workspace.

This may happen if the rod overheats or if the nozzle is not kept clean. Try reducing the temperature slightly or cleaning the nozzle after each use.