Farrow & Ball Dead Flat Paint - Cream - 5L

A 'Dead Flat' finish is an ultra-matte sheen that reflects almost no light, creating a soft, velvety appearance and minimizing surface imperfections. It's the lowest sheen offered by Farrow & Ball.

No, Farrow & Ball Dead Flat Paint is designed for interior use only. It is not formulated to withstand outdoor conditions.

Due to its alkyd resin base, brushes and tools should be cleaned with white spirit or a suitable brush cleaner immediately after use. Do not allow paint to dry on equipment.

Recoatable time is typically 4-6 hours, and the paint will be dry to touch within a similar timeframe. However, full curing can take several days or weeks, during which time the finish will harden.

While durable, Dead Flat is not specifically formulated for high-moisture environments like bathrooms or kitchens where extensive steam and frequent washing are common. For these areas, Farrow & Ball recommend their Estate Eggshell or Modern Eggshell finishes.

A 5-liter tin of Farrow & Ball Dead Flat Paint typically covers approximately 12 square meters per liter (120 sq m for a 5L tin), depending on the surface porosity and application method.

Farrow & Ball strongly recommends using their own primers for best results, as they are formulated to work in harmony with their topcoats. However, a high-quality, water-based or solvent-based primer appropriate for the surface may be used, but test first.

Ensure the surface was properly prepared, cleaned, and primed if necessary. Check for any residual moisture or contaminants on the surface before application.

Ensure the paint was stirred thoroughly. Apply thin, even coats, maintaining a 'wet edge' to avoid lap marks. Use a high-quality brush or roller suitable for matte finishes.

While the paint is scuff-resistant, very deep or set-in marks may require gentle cleaning with a mild detergent and a soft cloth. Avoid harsh scrubbing.

Lighting conditions significantly affect color perception. Ensure you have tested the color in the intended room and under various lighting throughout the day. The final sheen can also influence the perceived depth of color.