Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop - 2 Pack 35mm Internal Speaker Top Hat Metal Mounting Fitting Pole Stand Socket
Visit shop2 offers from £13.99 - £14.79
View price history by clicking the chart icon.
This guide is for audio professionals and DIY enthusiasts looking to securely mount PA speakers onto stands. The key benefit is a robust, gravity-assisted mounting solution that offers 360-degree speaker rotation. A caveat to consider is the internal protrusion into the speaker cabinet, requiring pre-installation checks for clearance.
| Brand | B&Q |
|---|
A speaker top hat fitting is a type of mounting hardware that is installed into the base or side of a speaker cabinet. It allows the speaker to be securely placed and supported on the pole of a speaker stand.
The internal diameter is 35mm, which is a standard size compatible with most PA speaker stands.
The top hat will protrude approximately 3 inches (7.5cm) into the interior of the speaker cabinet.
Each top hat has a maximum weight load capacity of 25KG.
Yes, the top hat can be installed on the base or side of your speaker cabinet, depending on your desired orientation.
No, screws are not included with the top hat fitting. You will need to provide your own suitable screws for installation.
It is compatible with 99% of speaker stands that use a standard 35mm pole diameter.
Ensure the top hat is securely screwed into the speaker cabinet and the speaker stand pole is fully inserted into the top hat. Check that the top hat's brim is flush with the cabinet.
Ensure the drilled hole is the correct size (slightly larger than 35mm). Verify there are no obstructions inside the speaker cabinet preventing full insertion.
Confirm the speaker stand has a standard 35mm pole diameter. Measure the internal diameter of the top hat to ensure it is also 35mm. Some older or non-standard stands may vary.
Setup:
Compatibility:
Care:
