Square Twist Nails - TIMco - Silver - GST30LB

A twisted shank provides increased friction and mechanical interlock with the material, resulting in significantly higher pull-out resistance compared to smooth shank nails. This makes them more secure for structural applications.

Service Class 2 refers to timber structures protected from the weather and the ground, but which may be subject to occasional wetting. This typically includes internal elements in heated buildings or elements in unheated buildings that are protected from rain.

Yes, they are suitable for outdoor use in occasionally damp or wet environments (Service Class 2) due to their galvanised finish. However, they are not recommended for prolonged exposure to harsh weather or highly corrosive conditions.

There are approximately 357 nails per 1kg. Therefore, a 2.5kg pack would contain roughly 892 nails (357 x 2.5).

These nails are made from carbon steel, providing a balance of strength and durability for construction purposes.

They conform to the CE Standard BS EN 14592:2008, which specifies requirements for fasteners used in timber structures.

While they are strong, these nails are specifically designed for builders' metalwork and structural timber connections. For drywall, dedicated drywall screws or nails are generally more appropriate.

Ensure the nail gun is perpendicular to the surface. Check for obstructions in the wood or metalwork. Verify the nail gun is loaded correctly.

The twisted shank requires sufficient material to grip; ensure nails are driven fully into the material. Avoid driving into pre-drilled holes that are too large.

Handle nails with care to avoid scratching. If minor damage occurs, ensure the surrounding area is dry. For critical applications, consider touch-up galvanising paint if available.

Check for bent or improperly seated nails. Clear the jam according to your nail gun's manual. Ensure you are using the correct size nails for your tool.