Corksystem Cork Roll - 8mm - 5m2

The recommended adhesive depends on the surface. Contact adhesive or construction adhesive is generally suitable for most applications. Always follow the adhesive manufacturer's instructions.

Yes, the cork roll can be painted. Use a paint that is suitable for porous surfaces. Primer may be necessary for best results.

Use a sharp utility knife and a straight edge. Make multiple passes with the knife to cut through the material cleanly.

The cork roll is water-resistant but not entirely waterproof. It should not be exposed to excessive moisture or direct water contact.

The cork roll is primarily designed for indoor use. While it can withstand some outdoor conditions, prolonged exposure to weather may degrade the material.

The Corksystem Cork Roll is 8mm thick.

The dimensions of the cork roll are 1m x 5m.

The cork is sourced sustainably from the bark of cork oak trees.

Ensure the surface is clean and dry. Use an appropriate adhesive and follow the manufacturer's instructions. Apply sufficient pressure during installation.

Ensure complete coverage without gaps. Check for any air pockets or loose areas. Consider adding an additional layer of cork or other soundproofing materials for enhanced results.

Handle the cork roll carefully during installation. Use sharp tools for cutting to minimize tearing or fraying. If damage occurs, consider patching or replacing the affected area.