The Ronseal Kitchen and Bathroom Repair Kit is a complete solution for repairing chips and damage ...The Ronseal Kitchen and Bathroom Repair Kit is a complete solution for repairing chips and damage on porcelain, enamel, acrylic, and fibreglass surfaces. It provides a tough, waterproof finish and includes all the tools and materials needed for a seamless repair. This kit contains everything you need for the easy and professional repair of cracks, scratches, and defects on kitchen and bathroom fixtures and appliances. It is long lasting, tough, durable, and waterproof and leaves a smooth white finish in just 3 easy steps. Ideal for use on enamelled cast iron and steel, porcelain, fibreglass, acrylic and other similar material. Instantaneous repair of kitchen and bathroom fixtures and appliances e.g. sinks, washing machines, baths, ceramic tiles, refrigerators, shower stalls and hard water damage.
Key Features:
--Tough, durable repair for chips and damage
--Suitable for porcelain, enamel, acrylic, and fibreglass
--Waterproof finish
--Complete kit with filler, hardener, applicator, sandpaper, and touch-up enamel
Application Tips:
--Squeeze out the required amount of filler and mix with a small amount of hardener until fully blended.
--Use the applicator to pack the filler into the chip, leaving it slightly raised above the surface.
--Allow the filler to dry for 30 minutes.
--Sand the area to a smooth finish.
--Use brown sandpaper for enamel at
The Ronseal Kitchen and Bathroom Repair Kit is designed for anyone needing to fix chips and damage on surfaces like porcelain, enamel, and acrylic. Its key benefit is providing a tough, waterproof, and seamless repair, and the caveat is that careful application and adherence to the steps are essential for optimal results. This kit includes all the necessary materials to repair cracks, scratches, and defects on kitchen and bathroom fixtures, leaving a smooth white finish.
All features
Model Part Number
35108
Brand
Ronseal
Extended Product Information
FAQs
What surfaces is this repair kit suitable for?
The Ronseal Kitchen and Bathroom Repair Kit is suitable for porcelain, enamel, acrylic, and fibreglass surfaces, as well as enamelled cast iron and steel.
How long does the filler take to dry?
The filler should be allowed to dry for 30 minutes before sanding.
Can I use this kit on a hot surface?
No, it is not recommended for surfaces that are constantly exposed to high heat.
What should I do if the repair is not smooth after sanding?
Use finer sandpaper and apply light, even pressure. Multiple sanding passes may be necessary.
Is the repair waterproof?
Yes, the kit provides a waterproof finish.
What is included in the kit?
The kit includes filler, hardener, applicator, sandpaper, and touch-up enamel.
Can I use this on tiles?
Yes, the kit is suitable for use on ceramic tiles.
Troubleshooting
Filler not hardening
Ensure the correct ratio of filler and hardener is used, and that they are thoroughly mixed. If the issue persists, check the expiration date of the kit.
Uneven finish after sanding
Use finer sandpaper and apply light, even pressure. Multiple sanding passes may be necessary to achieve a smooth finish.
Color mismatch
The kit provides a white finish. For other colors, it might be necessary to color match using other products.
Pros and Cons
Pros
Complete kit with all necessary materials.
Provides a waterproof and durable finish.
Suitable for a wide range of materials.
Easy to follow, three-step application process.
Cons
Requires careful mixing of filler and hardener.
Color matching may be limited to white.
May require multiple applications for deep damage.
Setup, Compatibility & Care
Preparation:
Clean the damaged area thoroughly, ensuring it is free of dirt, grease, and loose debris.
Use the provided sandpaper to lightly roughen the surface around the damaged area for better adhesion.
Application:
Squeeze out the required amount of filler and mix with a small amount of hardener until fully blended.
Use the applicator to pack the filler into the chip, leaving it slightly raised above the surface.
Allow the filler to dry for 30 minutes.
Finishing:
Sand the area to a smooth finish, using the sandpaper provided.
Apply the touch-up enamel for a seamless finish.
Compatibility:
The kit is compatible with porcelain, enamel, acrylic, and fibreglass surfaces, as well as enamelled cast iron and steel. It is suitable for use on sinks, bathtubs, tiles, and appliances.
Care:
Avoid using abrasive cleaners or scrubbing the repaired area excessively.