Bond It Bitumen Emulsion - Dark Brown, 2.5L

Generally, bitumen emulsions are not designed to be painted over, as the coating can remain slightly flexible and may react with some paint solvents. It is best used as a final finish or is covered by other construction materials.

Drying times vary depending on temperature, humidity, and application thickness. Typically, it is touch-dry within a few hours, but full curing for waterproofing purposes can take 24-72 hours. Always consult the Technical Data Sheet for precise information.

For effective damp-proofing, two coats are generally recommended, applied at right angles to each other. Ensure the first coat is sufficiently dry to the touch before applying the second.

Yes, the product is resistant to extreme heat and cold, making it suitable for use in hot weather. However, avoid applying in direct, intense sunlight if possible, as this can make application more difficult.

No, this product is not designed or certified for contact with potable water and should not be used in such applications.

When stored correctly in sealed containers, the shelf life is typically 12 months from the date of manufacture. Check the product packaging for specific dates.

Ensure the product has not been stored below 5°C for extended periods. If slightly stiff, warm the container gently in a warm (not hot) environment. Do not add water or solvents unless explicitly stated in the Technical Data Sheet for a specific application.

The surface may have been dirty, dusty, or excessively greasy. Ensure thorough preparation, removing all contaminants. For damp surfaces, ensure no standing water is present, as this can hinder adhesion.

This could be due to inadequate coat thickness, insufficient drying time between coats, or the source of dampness not being fully addressed. Ensure the recommended number of coats and application rates are followed. Check for potential breaches in the membrane or continued ingress from other sources.

If the product has frozen, it may be damaged and its performance compromised. Allow it to thaw naturally at room temperature. If separation or significant change in consistency occurs, it may no longer be suitable for use. Contact the supplier if unsure.