This Hella Fuel Feed Unit is an electric fuel pump designed for a pressure of 3.5 bar and a flow r...This Hella Fuel Feed Unit is an electric fuel pump designed for a pressure of 3.5 bar and a flow rate of 80 l/h. It features 5 pins and is compatible with a wide range of vehicles including AUDI A3 Sportback (8PA) and A4 Limousine (8K2, B8); FORD MONDEO I (GBP), MONDEO I Kombi (BNP), MONDEO I Stufenheck (GBP); FIAT PUNTO (188), BARCHETTA (183), PUNTO (176), COUPE (FA/175), PUNTO Cabriolet (176C), BRAVO I (182), TIPO (160), BRAVA (182), ULYSSE (220), MAREA Weekend (185), MAREA (185), TEMPRA (159), TEMPRA S.W. (159); PEUGEOT 106 II Schrägheck (1A_, 1C_), 106 I (1A, 1C), 806 MPV, 605 (6B); CITROËN SAXO (S0, S1), XM (Y4), Xantia Schrägheck (X1_, X2_), XM (Y3), JUMPER Kasten (230L), Evasion (22, U6), JUMPER Pritsche/Fahrgestell (230), JUMPER Bus (230P), Xantia Kombi (X1_, X2_), XM Break (Y4), XM Break (Y3); ALFA ROMEO 155 (167); LANCIA Y (840A), DELTA I (831AB0), DELTA II (836), ZETA (220), DEDRA (835), DEDRA SW (835); DAEWOO Matiz Schrägheck (M100, M150); ROVER CABRIOLET (XW), 200 Coupe (XW), 200 Hatchback (XW), 400 (XW). The part number for this unit is 775012A. The recommended accessory article number is 770013. The weight of the unit is 0.758 kg.
This Hella Fuel Feed Unit (MPN: 775012A) is designed for vehicle owners and mechanics seeking a reliable electric fuel pump solution. Its key benefit is providing a consistent fuel supply at 3.5 bar pressure and 80 l/h flow rate. A potential caveat is its specific 5-pin connector, requiring careful verification for compatibility. This unit is engineered for optimal performance in a diverse range of AUDI, FORD, FIAT, PEUGEOT, CITROËN, ALFA ROMEO, LANCIA, DAEWOO, and ROVER vehicles.
All features
Model Part Number
775012A
Brand
Hella
Extended Product Information
FAQs
What is the flow rate of this Hella Fuel Feed Unit?
The Hella Fuel Feed Unit - 775012A has a flow rate of 80 liters per hour (l/h).
What is the operating pressure of this fuel pump?
This fuel pump is designed to operate at a pressure of 3.5 bar.
How many pins does the electrical connector have?
The electrical connector on this unit has 5 pins.
Which vehicle makes are compatible with this fuel feed unit?
This unit is compatible with a wide range of vehicles including AUDI, FORD, FIAT, PEUGEOT, CITROËN, ALFA ROMEO, LANCIA, DAEWOO, and ROVER models. Always verify with your vehicle's specific requirements.
What is the Hella part number for this fuel feed unit?
The Hella part number is 775012A.
What is the recommended accessory article number?
The recommended accessory article number is 770013.
How should I clean this fuel feed unit?
Fuel feed units are internal components and typically do not require cleaning. Maintenance is focused on the fuel system's fuel filter and ensuring clean fuel supply.
What is the weight of the unit?
The weight of the Hella Fuel Feed Unit - 775012A is 0.758 kg.
Troubleshooting
Engine cranks but won't start
Check for proper electrical connection to the 5-pin connector. Verify fuel pump is receiving power and ground. Ensure fuel lines are not kinked or blocked. Confirm the unit is the correct part number for the vehicle.
Reduced engine power or hesitation
The fuel pump may be weak or clogged. Check fuel filter for blockage. Confirm the unit is delivering the specified 3.5 bar pressure. Ensure no air is entering the fuel system.
Fuel pump is noisy or whining
This can indicate the pump is struggling, potentially due to a clogged fuel filter or low fuel level. Check fuel level and inspect fuel filter. If noise persists, the pump may need replacement.
Fuel leaks around the pump assembly
Ensure all seals and connections are properly seated and tightened during installation. Inspect the fuel tank seal and line connections for damage or wear.
Pros and Cons
Pros
Ensures consistent fuel pressure and flow for optimal engine performance.
Compatible with a broad spectrum of European and some Asian vehicle models.
Manufactured by a well-established automotive parts supplier, Hella.
Clear part number aids in correct identification and ordering.
Designed for direct replacement in compatible vehicle systems.
Cons
The 5-pin connector may not be universally compatible; verification is crucial.
Specific application requires cross-referencing with vehicle's original part.
Requires professional installation for ensuring proper fitment and electrical connection.
Flow rate and pressure might not be suitable for highly modified or performance-tuned engines.
Setup, Compatibility & Care
Compatibility Check: Before installation, meticulously verify that the Hella Fuel Feed Unit - 775012A (MPN: 775012A) is listed as compatible with your specific vehicle's make, model, and year. Pay close attention to the 5-pin connector configuration and compare it with your existing unit.
Installation: This unit should be installed by a qualified mechanic. Installation typically involves:
Safely relieving fuel system pressure.
Accessing the fuel tank and removing the old fuel pump module.
Carefully installing the new Hella fuel feed unit, ensuring all seals are properly seated.
Connecting the 5-pin electrical connector securely.
Reassembling the fuel tank components and performing a leak check.
Care: Fuel feed units are generally maintenance-free components within the fuel system. However, to ensure longevity and optimal performance:
Use only high-quality, clean fuel.
Regularly replace your vehicle's fuel filter as per the manufacturer's recommendations. A clogged filter can place undue strain on the fuel pump.
Avoid running the fuel tank consistently on very low levels, as this can lead to the pump overheating.