Thomas Dudley Hydroflo Telescopic Compact Inlet Valve - PVBV324301

The valve height is adjustable from 8" to 11.5". Refer to the product instructions for specific adjustment steps, which typically involve loosening a locking mechanism and sliding the valve to the desired height.

Use the provided key to safely remove the filter. Rinse the filter under running water to remove any debris. Reinstall the filter after cleaning.

The delay fill feature conserves water by preventing the cistern from refilling until the flushing cycle is complete, thereby reducing water consumption.

The tail is made of brass.

Turn off the water supply immediately. Inspect the valve for any obvious damage or loose connections. If the leak persists, consider replacing the valve.

The valve is designed for use in most plastic and ceramic exposed and concealed cisterns. Always check the dimensions and compatibility with your cistern before installation.

The valve has two built-in backflow prevention devices in the brass tail, ensuring the safety of your water supply.

Product manuals can be found on the Thomas Dudley website or by searching online using the product model number (PVBV324301).

Check the water supply valve to ensure it is fully open. Inspect the float valve for obstructions and adjust if necessary. Check the filter for blockages and clean it using the provided key.

Check the float height and adjust if the water level is too high. Inspect the valve for leaks and replace the unit if necessary.

Ensure the valve is properly installed and that the water pressure is within the recommended range. Consider installing a water hammer arrestor if the problem persists.