Crown Wood & MDF Primer & Undercoat - White

No, this primer is specifically designed for wood, chipboard, hardboard, MDF, and plywood.

One coat is usually sufficient, but a second coat may be necessary for porous surfaces or if complete coverage is not achieved.

This primer is compatible with both water-based and solvent-based paints. Always check the paint manufacturer's recommendations.

Store in a cool, dry place. Ensure the lid is tightly sealed to prevent the primer from drying out.

Yes, you can apply this primer using a spray system. Follow the manufacturer's instructions for your specific sprayer.

Coverage rates vary depending on the surface and application method. Typically, you can expect to cover approximately 10-12 square meters per liter.

Wash with soap and water immediately. If irritation persists, seek medical advice.

Ensure the surface is properly prepared (clean, dry, and lightly sanded). Apply a second coat of primer if necessary.

Ensure even application of the primer and undercoat. Avoid applying too much product in one area. Lightly sand between coats if needed.

Ensure adequate ventilation. Check the temperature and humidity levels in the room. Apply a thinner coat of primer.