FloPlast 114mm Square Stop End Gutter Outlet - White

You will need a saw (for cutting the gutter), a measuring tape, and possibly a ladder for access.

This outlet is specifically designed for FloPlast square gutter systems and 65mm square downpipes. It is not recommended for use with other systems.

Use a soft brush and soapy water to clean the outlet. Avoid harsh chemicals or abrasive cleaners.

The outlet is made from durable, weather-resistant materials.

It is not recommended to paint the outlet, as this may affect its performance and appearance.

Remove any debris or blockages from the outlet and downpipe to ensure proper water flow.

The stop end outlet directs rainwater from the square gutter into a downpipe and prevents water from spilling over the end of the gutter run.

Install the stop end at the end of a run, where the gutter needs to terminate and connect to a downpipe.

Ensure a tight push-fit connection and check for any obstructions. Re-seat the downpipe or use sealant if necessary.

Check for blockages in the gutter or downpipe. Ensure the outlet is properly aligned and that the downpipe has sufficient capacity for water flow.

Ensure the downpipe is a standard 65mm square size and that the push-fit connection is clean. Apply lubricant if necessary.